2610 Firewall IOS won't NAT

Discussion in 'Cisco' started by Chris G., Jul 15, 2003.

  1. Chris G.

    Chris G. Guest

    I have a 2621 loaded with c2600-io3-mz.123-1a.bin and I'm trying to set it
    up as a firewall. I used the Cisco Config maker to make the initial config.
    Once the router is loaded, it won't NAT. I even wiped out the config and put
    a basic config in still won't NAT. Does this IOS support NAT?
     
    Chris G., Jul 15, 2003
    #1
    1. Advertising

  2. Chris G.

    Amazing Guest

    post the config....


    "Chris G." <> wrote in message
    news:6IIQa.16413$...
    > I have a 2621 loaded with c2600-io3-mz.123-1a.bin and I'm trying to set it
    > up as a firewall. I used the Cisco Config maker to make the initial

    config.
    > Once the router is loaded, it won't NAT. I even wiped out the config and

    put
    > a basic config in still won't NAT. Does this IOS support NAT?
    >
    >
     
    Amazing, Jul 15, 2003
    #2
    1. Advertising

  3. Hi,

    It should support NAT. BTW, is your router 2621XM or 2621? If its 2621XM, go for
    new Security Device Manager (SDM).A new GUI to configure your access routers
    with firewall, VPN etc..

    www.cisco.com/go/sdm


    Ravikumar

    Amazing wrote:

    > post the config....
    >
    > "Chris G." <> wrote in message
    > news:6IIQa.16413$...
    > > I have a 2621 loaded with c2600-io3-mz.123-1a.bin and I'm trying to set it
    > > up as a firewall. I used the Cisco Config maker to make the initial

    > config.
    > > Once the router is loaded, it won't NAT. I even wiped out the config and

    > put
    > > a basic config in still won't NAT. Does this IOS support NAT?
    > >
    > >
     
    Ravikumar Eswaran, Jul 15, 2003
    #3
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Replies:
    2
    Views:
    777
  2. Watt
    Replies:
    0
    Views:
    604
  3. MrChen

    Cisco 2610 - NAT Problems

    MrChen, Oct 7, 2006, in forum: Cisco
    Replies:
    2
    Views:
    1,234
    MrChen
    Oct 8, 2006
  4. Replies:
    4
    Views:
    2,155
  5. Mike Rahl
    Replies:
    1
    Views:
    1,358
    Trendkill
    May 30, 2007
Loading...

Share This Page