2504 RX-BOOT

Discussion in 'Cisco' started by Modu.Miah@gmail.com, Jul 12, 2005.

  1. Guest

    A router I have only boots into RX-BOOT mode, I can't get it to do
    anything. I want to load a new IOS which I have but don't know how! How
    do I get into ROMmon mode so that I can load new IOS via xmodem?
    , Jul 12, 2005
    #1
    1. Advertising

  2. <> wrote in message
    news:...
    >A router I have only boots into RX-BOOT mode, I can't get it to do
    > anything. I want to load a new IOS which I have but don't know how! How
    > do I get into ROMmon mode so that I can load new IOS via xmodem?


    There is a good chance that your ROMMON is too old to support XMODEM.

    From the RXBOOT you should be able to assign an IP address to the LAN
    interface and use TFTP (copy tftp flash) which is MUCH MUCH faster than
    XMODEM.
    Phillip Remaker, Jul 13, 2005
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. pastypies

    Connecting to my 2504 router?

    pastypies, Nov 8, 2003, in forum: Cisco
    Replies:
    4
    Views:
    1,087
    Walter Roberson
    Nov 8, 2003
  2. Kristian Davies

    Cisco 2504 Password reset

    Kristian Davies, Nov 13, 2003, in forum: Cisco
    Replies:
    6
    Views:
    6,998
    Juergen Ilse
    Nov 14, 2003
  3. John
    Replies:
    1
    Views:
    4,629
  4. Voitec
    Replies:
    5
    Views:
    7,524
    Voitec
    Sep 12, 2004
  5. Istvan Takacs

    2504 router w Token Ring port?

    Istvan Takacs, Oct 19, 2004, in forum: Cisco
    Replies:
    1
    Views:
    435
    Pete Mainwaring
    Oct 21, 2004
Loading...

Share This Page