2 serial connections to the same router ?

Discussion in 'Cisco' started by jh3ang, Apr 10, 2006.

  1. jh3ang

    jh3ang Guest

    Two routers are connected each other with 2 serial connections.
    Each router has one workstation that has ip address, 129.13.1.2 and
    129.13.2.2.

    Because router has 2 serial connections to each other, I was expecting
    this output:
    Router2#>show ip route
    C 129.13.2.0/24 is directly connected, FastEthernet1/0
    C 192.168.1.0/24 is directly connected, Serial0/0
    C 192.168.2.0/24 is directly connected, Serial0/1
    R 129.13.1.0/24 [120/1] via 192.168.1.1, 00:05:22, Serial0/0
    R 129.13.1.0/24 [120/1] via 192.168.2.1, 00:05:22, Serial0/1

    But, the real one is below:
    Gateway of last resort is not set
    C 129.13.2.0/24 is directly connected, FastEthernet1/0
    C 192.168.1.0/24 is directly connected, Serial0/0
    C 192.168.2.0/24 is directly connected, Serial0/1
    R 129.13.1.0/24 [120/1] via 192.168.2.1, 00:05:22, Serial0/1

    I don't know what causes this problem.
    It should have one more line, 'cause I have another serial connection.

    "R 129.13.1.0/24 [120/1] via 192.168.1.1, 00:05:22, Serial0/0"

    Please help me out..
     
    jh3ang, Apr 10, 2006
    #1
    1. Advertising

  2. jh3ang

    Guest

    What version of software are you running? Could you post your
    configuration?

    The maximum number of equal cost paths allowed is controlled by the
    "maximum-paths" command under the rip router configuration and by
    default up to 4 paths are supported. Do you by any chance have the
    maximum-paths set at 1?

    Cisco da Gama
    http://ciscostudy.blogspot.com
     
    , Apr 11, 2006
    #2
    1. Advertising

  3. jh3ang

    jh3ang Guest

    I guess my network simulator software doesn't support that kind of
    situation.
    I use boson network simulator. It's good,but when I study more and
    more, it's limitation reveals. -.- or something is wrong with my
    setting.
     
    jh3ang, Apr 12, 2006
    #3
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Faustino Dina
    Replies:
    2
    Views:
    2,353
    Hansang Bae
    Aug 18, 2004
  2. Scooter
    Replies:
    5
    Views:
    7,195
    krycheq
    Dec 16, 2004
  3. Robert11
    Replies:
    1
    Views:
    598
  4. GT

    350d serial number - what serial number?!?

    GT, Apr 6, 2005, in forum: Digital Photography
    Replies:
    6
    Views:
    598
    eatmorepies
    Apr 7, 2005
  5. just bob
    Replies:
    2
    Views:
    283
    just bob
    Apr 11, 2007
Loading...

Share This Page