1602 Boot Error IP FW Plus IPSEC 56 Feature Pack

Discussion in 'Cisco' started by Craig Cordts, Apr 20, 2004.

  1. Craig Cordts

    Craig Cordts Guest

    Hey Folks -

    I picked up a 8 MB Flash with a IP FW Plus IPSEC 56 Feature Pack image on it
    to do some testing on my 1602 lab
    routers. I added a 8 MB SIMM to accommodate the newer IOS but unfortunately
    I get the following error when the router boots. I am not sure if the SIMM I
    put in is parity checking or not but it seems to work with the older IOS
    (12.0). I am not sure if the router crash is a problem with SIMM I put in or
    something funking with the FLASH/IOS I am trying to load. This is the IOS
    image on the FLASH: c1600-k8osy-mz.123-5a.bin

    Anyone else running the IP FW Plus IPSEC 56 Feature Pack on a 1602 ? If so,
    how much RAM are you running.

    %QUICC_ETHER-1-LOSTCARR: Unit 0, lost carrier. Transceiver problem?
    %SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
    program load complete, entry point: 0x2005000, size: 0x69771b
    Self decompressing the image :
    #################################################
    #################### [OK]

    Unexpected exception to CPU vector 2, PC = 2DE111A

    -Traceback= 2DE111A

    *** EXCEPTION ***
    exception number = 443
    program counter = 0xde0002f2
    status register = 0x2700
    vbr at time of exception = 0x4000000

    monitor: command "boot" aborted due to exception

    Craig
    Craig Cordts, Apr 20, 2004
    #1
    1. Advertising

  2. Craig Cordts

    News Account Guest

    That release is for a 160xR - the "mz" in the file name tells me it is runs
    in memory and is zipped. The 160x file name has an "l" instead of "mz" in
    the file name and is a different image.

    If you have a 1602R then you need 24MB RAM and 16MB Flash to run it.

    Don Woodward


    "Craig Cordts" <> wrote in message
    news:...
    > Hey Folks -
    >
    > I picked up a 8 MB Flash with a IP FW Plus IPSEC 56 Feature Pack image on

    it
    > to do some testing on my 1602 lab
    > routers. I added a 8 MB SIMM to accommodate the newer IOS but

    unfortunately
    > I get the following error when the router boots. I am not sure if the SIMM

    I
    > put in is parity checking or not but it seems to work with the older IOS
    > (12.0). I am not sure if the router crash is a problem with SIMM I put in

    or
    > something funking with the FLASH/IOS I am trying to load. This is the IOS
    > image on the FLASH: c1600-k8osy-mz.123-5a.bin
    >
    > Anyone else running the IP FW Plus IPSEC 56 Feature Pack on a 1602 ? If

    so,
    > how much RAM are you running.
    >
    > %QUICC_ETHER-1-LOSTCARR: Unit 0, lost carrier. Transceiver problem?
    > %SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
    > program load complete, entry point: 0x2005000, size: 0x69771b
    > Self decompressing the image :
    > #################################################
    > #################### [OK]
    >
    > Unexpected exception to CPU vector 2, PC = 2DE111A
    >
    > -Traceback= 2DE111A
    >
    > *** EXCEPTION ***
    > exception number = 443
    > program counter = 0xde0002f2
    > status register = 0x2700
    > vbr at time of exception = 0x4000000
    >
    > monitor: command "boot" aborted due to exception
    >
    > Craig
    >
    >
    News Account, Apr 20, 2004
    #2
    1. Advertising

  3. Craig Cordts

    Ben Guest

    The IOS will tell you if you haven't got enough memory at startup.
    You definately don't have enough RAM but the error makes me think the RAM
    may be dodgy.

    "News Account" <> wrote in message
    news:bnfhc.28308$...
    > That release is for a 160xR - the "mz" in the file name tells me it is

    runs
    > in memory and is zipped. The 160x file name has an "l" instead of "mz" in
    > the file name and is a different image.
    >
    > If you have a 1602R then you need 24MB RAM and 16MB Flash to run it.
    >
    > Don Woodward
    >
    >
    > "Craig Cordts" <> wrote in message
    > news:...
    > > Hey Folks -
    > >
    > > I picked up a 8 MB Flash with a IP FW Plus IPSEC 56 Feature Pack image

    on
    > it
    > > to do some testing on my 1602 lab
    > > routers. I added a 8 MB SIMM to accommodate the newer IOS but

    > unfortunately
    > > I get the following error when the router boots. I am not sure if the

    SIMM
    > I
    > > put in is parity checking or not but it seems to work with the older IOS
    > > (12.0). I am not sure if the router crash is a problem with SIMM I put

    in
    > or
    > > something funking with the FLASH/IOS I am trying to load. This is the

    IOS
    > > image on the FLASH: c1600-k8osy-mz.123-5a.bin
    > >
    > > Anyone else running the IP FW Plus IPSEC 56 Feature Pack on a 1602 ? If

    > so,
    > > how much RAM are you running.
    > >
    > > %QUICC_ETHER-1-LOSTCARR: Unit 0, lost carrier. Transceiver problem?
    > > %SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
    > > program load complete, entry point: 0x2005000, size: 0x69771b
    > > Self decompressing the image :
    > > #################################################
    > > #################### [OK]
    > >
    > > Unexpected exception to CPU vector 2, PC = 2DE111A
    > >
    > > -Traceback= 2DE111A
    > >
    > > *** EXCEPTION ***
    > > exception number = 443
    > > program counter = 0xde0002f2
    > > status register = 0x2700
    > > vbr at time of exception = 0x4000000
    > >
    > > monitor: command "boot" aborted due to exception
    > >
    > > Craig
    > >
    > >

    >
    >
    >
    Ben, Apr 25, 2004
    #3
  4. Craig Cordts

    News Account Guest

    The IOS probably will not give a insufficient memory error if he is using
    the wrong image.

    He needs to make sure he's using the image he has in a 160xR and not a
    160x - the images _are_ different.

    Don Woodward


    "Ben" <> wrote in message
    news:mqKic.9268$...
    > The IOS will tell you if you haven't got enough memory at startup.
    > You definately don't have enough RAM but the error makes me think the RAM
    > may be dodgy.
    >
    > "News Account" <> wrote in message
    > news:bnfhc.28308$...
    > > That release is for a 160xR - the "mz" in the file name tells me it is

    > runs
    > > in memory and is zipped. The 160x file name has an "l" instead of "mz"

    in
    > > the file name and is a different image.
    > >
    > > If you have a 1602R then you need 24MB RAM and 16MB Flash to run it.
    > >
    > > Don Woodward
    > >
    > >
    > > "Craig Cordts" <> wrote in message
    > > news:...
    > > > Hey Folks -
    > > >
    > > > I picked up a 8 MB Flash with a IP FW Plus IPSEC 56 Feature Pack image

    > on
    > > it
    > > > to do some testing on my 1602 lab
    > > > routers. I added a 8 MB SIMM to accommodate the newer IOS but

    > > unfortunately
    > > > I get the following error when the router boots. I am not sure if the

    > SIMM
    > > I
    > > > put in is parity checking or not but it seems to work with the older

    IOS
    > > > (12.0). I am not sure if the router crash is a problem with SIMM I put

    > in
    > > or
    > > > something funking with the FLASH/IOS I am trying to load. This is the

    > IOS
    > > > image on the FLASH: c1600-k8osy-mz.123-5a.bin
    > > >
    > > > Anyone else running the IP FW Plus IPSEC 56 Feature Pack on a 1602 ?

    If
    > > so,
    > > > how much RAM are you running.
    > > >
    > > > %QUICC_ETHER-1-LOSTCARR: Unit 0, lost carrier. Transceiver problem?
    > > > %SYS-6-BOOT_MESSAGES: Messages above this line are from the boot

    loader.
    > > > program load complete, entry point: 0x2005000, size: 0x69771b
    > > > Self decompressing the image :
    > > > #################################################
    > > > #################### [OK]
    > > >
    > > > Unexpected exception to CPU vector 2, PC = 2DE111A
    > > >
    > > > -Traceback= 2DE111A
    > > >
    > > > *** EXCEPTION ***
    > > > exception number = 443
    > > > program counter = 0xde0002f2
    > > > status register = 0x2700
    > > > vbr at time of exception = 0x4000000
    > > >
    > > > monitor: command "boot" aborted due to exception
    > > >
    > > > Craig
    > > >
    > > >

    > >
    > >
    > >

    >
    >
    News Account, Apr 26, 2004
    #4
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Simon Telrenner
    Replies:
    2
    Views:
    450
    Ted Mittelstaedt
    Oct 16, 2003
  2. Lowell
    Replies:
    2
    Views:
    588
  3. Kevin Schroeder

    Port forwarding on a 1602

    Kevin Schroeder, Jul 23, 2004, in forum: Cisco
    Replies:
    2
    Views:
    3,438
    Kevin Schroeder
    Jul 26, 2004
  4. Tom Gudmundsen

    1602 Router/ No IOS

    Tom Gudmundsen, Jul 29, 2005, in forum: Cisco
    Replies:
    2
    Views:
    403
    www.BradReese.Com
    Jul 30, 2005
  5. Kirk Goins

    1602 to Telco Connection

    Kirk Goins, Oct 11, 2005, in forum: Cisco
    Replies:
    0
    Views:
    370
    Kirk Goins
    Oct 11, 2005
Loading...

Share This Page