12.3 PAT not working

Discussion in 'Cisco' started by Jason, Jul 1, 2004.

  1. Jason

    Jason Guest

    I have an 837 as 192.168.1.2 (Ethernet0) and ADSL (Dialer1). Trying to make
    available to the internet a server on 192.168.1.1, but after lots of reading
    and adjustments to IOS config I can't get it to work. I have watched packets
    on the .1 server and confirmed that nothing is being sent to it from the
    837. WOudl appreciate if someone could take a look at my running-config and
    see where I've gone wrong, or what I've missed. Thanks.


    !
    ! Last configuration change at 23:55:22 EST Wed Jun 30 2004 by router
    ! NVRAM config last updated at 23:55:26 EST Wed Jun 30 2004 by router
    !
    version 12.3
    service nagle
    no service pad
    service tcp-keepalives-in
    service tcp-keepalives-out
    service timestamps debug datetime msec localtime show-timezone
    service timestamps log datetime msec localtime show-timezone
    service password-encryption
    service sequence-numbers
    !
    hostname cisco837
    !
    boot-start-marker
    boot-end-marker
    !
    security authentication failure rate 3 log
    logging buffered 51200 warnings
    enable secret 5 xxxxx
    !
    username Router password 7 xxxxx
    clock timezone EST 10
    clock summer-time EDT recurring last Sun Oct 2:00 last Sun Mar 3:00
    no aaa new-model
    ip subnet-zero
    no ip source-route
    ip wccp version 1
    ip wccp outbound-acl-check
    ip wccp web-cache redirect-list 50
    !
    !
    ip dhcp excluded-address 192.168.1.1 192.168.1.9
    !
    ip dhcp pool CLIENT
    network 192.168.1.0 255.255.255.0
    default-router 192.168.1.2
    dns-server 192.168.1.1 210.15.254.240 210.15.254.241
    netbios-name-server 192.168.1.1
    domain-name netspace.net.au
    update arp
    !
    !
    ip domain name netspace.net.au
    ip host openbsd 192.168.1.1
    ip name-server 192.168.1.1
    ip name-server 210.15.254.240
    ip name-server 210.15.254.241
    ip cef
    ip inspect audit-trail
    ip inspect tcp max-incomplete host 50 block-time 2
    ip inspect name OUTBOUND cuseeme
    ip inspect name OUTBOUND ftp
    ip inspect name OUTBOUND h323
    ip inspect name OUTBOUND netshow
    ip inspect name OUTBOUND rcmd
    ip inspect name OUTBOUND realaudio
    ip inspect name OUTBOUND rtsp
    ip inspect name OUTBOUND smtp
    ip inspect name OUTBOUND sqlnet
    ip inspect name OUTBOUND streamworks
    ip inspect name OUTBOUND tftp
    ip inspect name OUTBOUND tcp
    ip inspect name OUTBOUND udp
    ip inspect name OUTBOUND vdolive
    ip inspect name OUTBOUND icmp
    ip ips po max-events 100
    no ftp-server write-enable
    !
    !
    !
    !
    !
    !
    !
    interface Ethernet0
    description $FW_INSIDE$$ETH-LAN$
    ip address 192.168.1.2 255.255.255.0
    ip access-group 100 in
    ip nat inside
    ip virtual-reassembly
    ip route-cache flow
    no ip mroute-cache
    hold-queue 100 out
    !
    interface ATM0
    no ip address
    ip route-cache flow
    no ip mroute-cache
    atm vc-per-vp 64
    no atm ilmi-keepalive
    dsl operating-mode auto
    pvc 8/35
    encapsulation aal5mux ppp dialer
    dialer pool-member 1
    !
    !
    interface FastEthernet1
    no ip address
    duplex auto
    speed auto
    !
    interface FastEthernet2
    no ip address
    duplex auto
    speed auto
    !
    interface FastEthernet3
    no ip address
    duplex auto
    speed auto
    !
    interface FastEthernet4
    no ip address
    duplex auto
    speed auto
    !
    interface Dialer0
    no ip address
    !
    interface Dialer1
    description $FW_OUTSIDE$512K/128K ADSL to Netspace.net.au
    ip address negotiated
    ip access-group 101 in
    no ip proxy-arp
    ip wccp web-cache redirect out
    ip nat outside
    ip inspect OUTBOUND out
    ip virtual-reassembly
    encapsulation ppp
    ip route-cache flow
    dialer pool 1
    dialer-group 1
    no cdp enable
    ppp authentication chap pap callin
    ppp chap hostname xxxxx
    ppp chap password 7 xxxxx
    ppp pap sent-username xxxxx password 7 xxxxx
    hold-queue 224 in
    !
    ip classless
    ip route 0.0.0.0 0.0.0.0 Dialer1
    !
    ip http server
    ip http access-class 1
    ip http secure-server
    ip nat inside source list 102 interface Dialer1 overload
    ip nat inside source static 192.168.1.1 interface Dialer0
    ip nat inside source static tcp 192.168.1.1 22 interface Dialer1 22
    ip nat inside source static tcp 192.168.1.1 80 interface Dialer1 80
    ip nat inside source static tcp 192.168.1.1 21 interface Dialer1 21
    ip nat inside source static tcp 192.168.1.1 25 interface Dialer1 25
    !
    !
    logging 192.168.1.1
    access-list 1 permit 192.168.1.0 0.0.0.255
    access-list 1 deny any
    access-list 23 permit 192.168.1.0 0.0.0.255
    access-list 50 deny 192.168.1.1
    access-list 50 permit any
    access-list 100 permit ip any any
    access-list 101 permit udp host 210.15.254.242 eq ntp any eq ntp
    access-list 101 permit tcp any eq smtp any eq smtp
    access-list 101 permit tcp any eq www any eq www
    access-list 101 permit tcp any eq ftp any eq ftp
    access-list 101 permit tcp any eq 22 any eq 22
    access-list 101 permit icmp any any echo-reply
    access-list 101 permit icmp any any time-exceeded
    access-list 101 permit icmp any any unreachable
    access-list 101 deny ip 10.0.0.0 0.255.255.255 any
    access-list 101 deny ip 172.16.0.0 0.15.255.255 any
    access-list 101 deny ip 192.168.0.0 0.0.255.255 any
    access-list 101 deny ip 127.0.0.0 0.255.255.255 any
    access-list 101 deny ip host 255.255.255.255 any
    access-list 101 deny ip host 0.0.0.0 any
    access-list 101 deny ip any any log
    access-list 102 permit ip 192.168.1.0 0.0.0.255 any
    dialer-list 1 protocol ip permit
    snmp-server community cisco837 RO
    snmp-server enable traps tty
    !
    control-plane
    !
    !
    line con 0
    exec-timeout 120 0
    no modem enable
    transport preferred all
    transport output all
    stopbits 1
    line aux 0
    transport preferred all
    transport output all
    line vty 0 4
    access-class 23 in
    exec-timeout 120 0
    login local
    length 0
    transport preferred all
    transport input ssh
    transport output all
    !
    scheduler max-task-time 5000
    scheduler interval 500
    sntp server 210.15.254.242
    end



    --
    Cheers,
    Jason

    Note: Use ROT13 to decipher my email address
    Jason, Jul 1, 2004
    #1
    1. Advertising

  2. Jason

    PES Guest

    Check your access-list. See below

    access-list 101 permit tcp any eq smtp any eq smtp
    access-list 101 permit tcp any eq www any eq www
    access-list 101 permit tcp any eq ftp any eq ftp
    access-list 101 permit tcp any eq 22 any eq 22
    This access-list is applied inbound on your external interface. So what it
    says is
    permit anything sourced from tcp port 25 destined to port 25
    permit anything sourced from tcp port 80 destined to port 80
    ........

    The typical tcp client will establish a session from a port greater than
    1023. This is known as dynamic ports. There are a few applications that
    use the same source and destination port but this is actually more prevelant
    in udp. Try changing your access-list to the following


    ........
    access-list 101 permit tcp any gt 1023 any eq smtp
    access-list 101 permit tcp any gt 1023 any eq www
    access-list 101 permit tcp any gt 1023 any eq ftp (also note this will only
    work for passive ftp)
    access-list 101 permit tcp any gt 1023 any eq 22
    .........





    "Jason" <> wrote in message
    news:cbvgme$1hgf$...
    >
    > I have an 837 as 192.168.1.2 (Ethernet0) and ADSL (Dialer1). Trying to

    make
    > available to the internet a server on 192.168.1.1, but after lots of

    reading
    > and adjustments to IOS config I can't get it to work. I have watched

    packets
    > on the .1 server and confirmed that nothing is being sent to it from the
    > 837. WOudl appreciate if someone could take a look at my running-config

    and
    > see where I've gone wrong, or what I've missed. Thanks.
    >
    >
    > !
    > ! Last configuration change at 23:55:22 EST Wed Jun 30 2004 by router
    > ! NVRAM config last updated at 23:55:26 EST Wed Jun 30 2004 by router
    > !
    > version 12.3
    > service nagle
    > no service pad
    > service tcp-keepalives-in
    > service tcp-keepalives-out
    > service timestamps debug datetime msec localtime show-timezone
    > service timestamps log datetime msec localtime show-timezone
    > service password-encryption
    > service sequence-numbers
    > !
    > hostname cisco837
    > !
    > boot-start-marker
    > boot-end-marker
    > !
    > security authentication failure rate 3 log
    > logging buffered 51200 warnings
    > enable secret 5 xxxxx
    > !
    > username Router password 7 xxxxx
    > clock timezone EST 10
    > clock summer-time EDT recurring last Sun Oct 2:00 last Sun Mar 3:00
    > no aaa new-model
    > ip subnet-zero
    > no ip source-route
    > ip wccp version 1
    > ip wccp outbound-acl-check
    > ip wccp web-cache redirect-list 50
    > !
    > !
    > ip dhcp excluded-address 192.168.1.1 192.168.1.9
    > !
    > ip dhcp pool CLIENT
    > network 192.168.1.0 255.255.255.0
    > default-router 192.168.1.2
    > dns-server 192.168.1.1 210.15.254.240 210.15.254.241
    > netbios-name-server 192.168.1.1
    > domain-name netspace.net.au
    > update arp
    > !
    > !
    > ip domain name netspace.net.au
    > ip host openbsd 192.168.1.1
    > ip name-server 192.168.1.1
    > ip name-server 210.15.254.240
    > ip name-server 210.15.254.241
    > ip cef
    > ip inspect audit-trail
    > ip inspect tcp max-incomplete host 50 block-time 2
    > ip inspect name OUTBOUND cuseeme
    > ip inspect name OUTBOUND ftp
    > ip inspect name OUTBOUND h323
    > ip inspect name OUTBOUND netshow
    > ip inspect name OUTBOUND rcmd
    > ip inspect name OUTBOUND realaudio
    > ip inspect name OUTBOUND rtsp
    > ip inspect name OUTBOUND smtp
    > ip inspect name OUTBOUND sqlnet
    > ip inspect name OUTBOUND streamworks
    > ip inspect name OUTBOUND tftp
    > ip inspect name OUTBOUND tcp
    > ip inspect name OUTBOUND udp
    > ip inspect name OUTBOUND vdolive
    > ip inspect name OUTBOUND icmp
    > ip ips po max-events 100
    > no ftp-server write-enable
    > !
    > !
    > !
    > !
    > !
    > !
    > !
    > interface Ethernet0
    > description $FW_INSIDE$$ETH-LAN$
    > ip address 192.168.1.2 255.255.255.0
    > ip access-group 100 in
    > ip nat inside
    > ip virtual-reassembly
    > ip route-cache flow
    > no ip mroute-cache
    > hold-queue 100 out
    > !
    > interface ATM0
    > no ip address
    > ip route-cache flow
    > no ip mroute-cache
    > atm vc-per-vp 64
    > no atm ilmi-keepalive
    > dsl operating-mode auto
    > pvc 8/35
    > encapsulation aal5mux ppp dialer
    > dialer pool-member 1
    > !
    > !
    > interface FastEthernet1
    > no ip address
    > duplex auto
    > speed auto
    > !
    > interface FastEthernet2
    > no ip address
    > duplex auto
    > speed auto
    > !
    > interface FastEthernet3
    > no ip address
    > duplex auto
    > speed auto
    > !
    > interface FastEthernet4
    > no ip address
    > duplex auto
    > speed auto
    > !
    > interface Dialer0
    > no ip address
    > !
    > interface Dialer1
    > description $FW_OUTSIDE$512K/128K ADSL to Netspace.net.au
    > ip address negotiated
    > ip access-group 101 in
    > no ip proxy-arp
    > ip wccp web-cache redirect out
    > ip nat outside
    > ip inspect OUTBOUND out
    > ip virtual-reassembly
    > encapsulation ppp
    > ip route-cache flow
    > dialer pool 1
    > dialer-group 1
    > no cdp enable
    > ppp authentication chap pap callin
    > ppp chap hostname xxxxx
    > ppp chap password 7 xxxxx
    > ppp pap sent-username xxxxx password 7 xxxxx
    > hold-queue 224 in
    > !
    > ip classless
    > ip route 0.0.0.0 0.0.0.0 Dialer1
    > !
    > ip http server
    > ip http access-class 1
    > ip http secure-server
    > ip nat inside source list 102 interface Dialer1 overload
    > ip nat inside source static 192.168.1.1 interface Dialer0
    > ip nat inside source static tcp 192.168.1.1 22 interface Dialer1 22
    > ip nat inside source static tcp 192.168.1.1 80 interface Dialer1 80
    > ip nat inside source static tcp 192.168.1.1 21 interface Dialer1 21
    > ip nat inside source static tcp 192.168.1.1 25 interface Dialer1 25
    > !
    > !
    > logging 192.168.1.1
    > access-list 1 permit 192.168.1.0 0.0.0.255
    > access-list 1 deny any
    > access-list 23 permit 192.168.1.0 0.0.0.255
    > access-list 50 deny 192.168.1.1
    > access-list 50 permit any
    > access-list 100 permit ip any any
    > access-list 101 permit udp host 210.15.254.242 eq ntp any eq ntp
    > access-list 101 permit tcp any eq smtp any eq smtp
    > access-list 101 permit tcp any eq www any eq www
    > access-list 101 permit tcp any eq ftp any eq ftp
    > access-list 101 permit tcp any eq 22 any eq 22
    > access-list 101 permit icmp any any echo-reply
    > access-list 101 permit icmp any any time-exceeded
    > access-list 101 permit icmp any any unreachable
    > access-list 101 deny ip 10.0.0.0 0.255.255.255 any
    > access-list 101 deny ip 172.16.0.0 0.15.255.255 any
    > access-list 101 deny ip 192.168.0.0 0.0.255.255 any
    > access-list 101 deny ip 127.0.0.0 0.255.255.255 any
    > access-list 101 deny ip host 255.255.255.255 any
    > access-list 101 deny ip host 0.0.0.0 any
    > access-list 101 deny ip any any log
    > access-list 102 permit ip 192.168.1.0 0.0.0.255 any
    > dialer-list 1 protocol ip permit
    > snmp-server community cisco837 RO
    > snmp-server enable traps tty
    > !
    > control-plane
    > !
    > !
    > line con 0
    > exec-timeout 120 0
    > no modem enable
    > transport preferred all
    > transport output all
    > stopbits 1
    > line aux 0
    > transport preferred all
    > transport output all
    > line vty 0 4
    > access-class 23 in
    > exec-timeout 120 0
    > login local
    > length 0
    > transport preferred all
    > transport input ssh
    > transport output all
    > !
    > scheduler max-task-time 5000
    > scheduler interval 500
    > sntp server 210.15.254.242
    > end
    >
    >
    >
    > --
    > Cheers,
    > Jason
    >
    > Note: Use ROT13 to decipher my email address
    >
    >
    >
    PES, Jul 1, 2004
    #2
    1. Advertising

  3. Jason

    Jason Guest

    Thanks. That did it. Much appreciated.


    --
    Cheers,
    Jason

    Note: Use ROT13 to decipher my email address


    "PES" <NO*SPAMpestewartREMOVE**SUCKS> wrote in message
    news:...
    > Check your access-list. See below
    >
    > access-list 101 permit tcp any eq smtp any eq smtp
    > access-list 101 permit tcp any eq www any eq www
    > access-list 101 permit tcp any eq ftp any eq ftp
    > access-list 101 permit tcp any eq 22 any eq 22
    > This access-list is applied inbound on your external interface. So what

    it
    > says is
    > permit anything sourced from tcp port 25 destined to port 25
    > permit anything sourced from tcp port 80 destined to port 80
    > .......
    >
    > The typical tcp client will establish a session from a port greater than
    > 1023. This is known as dynamic ports. There are a few applications that
    > use the same source and destination port but this is actually more

    prevelant
    > in udp. Try changing your access-list to the following
    >
    >
    > .......
    > access-list 101 permit tcp any gt 1023 any eq smtp
    > access-list 101 permit tcp any gt 1023 any eq www
    > access-list 101 permit tcp any gt 1023 any eq ftp (also note this will

    only
    > work for passive ftp)
    > access-list 101 permit tcp any gt 1023 any eq 22
    > ........
    >
    >
    >
    >
    >
    > "Jason" <> wrote in message
    > news:cbvgme$1hgf$...
    > >
    > > I have an 837 as 192.168.1.2 (Ethernet0) and ADSL (Dialer1). Trying to

    > make
    > > available to the internet a server on 192.168.1.1, but after lots of

    > reading
    > > and adjustments to IOS config I can't get it to work. I have watched

    > packets
    > > on the .1 server and confirmed that nothing is being sent to it from the
    > > 837. WOudl appreciate if someone could take a look at my running-config

    > and
    > > see where I've gone wrong, or what I've missed. Thanks.
    > >
    > >
    > > !
    > > ! Last configuration change at 23:55:22 EST Wed Jun 30 2004 by router
    > > ! NVRAM config last updated at 23:55:26 EST Wed Jun 30 2004 by router
    > > !
    > > version 12.3
    > > service nagle
    > > no service pad
    > > service tcp-keepalives-in
    > > service tcp-keepalives-out
    > > service timestamps debug datetime msec localtime show-timezone
    > > service timestamps log datetime msec localtime show-timezone
    > > service password-encryption
    > > service sequence-numbers
    > > !
    > > hostname cisco837
    > > !
    > > boot-start-marker
    > > boot-end-marker
    > > !
    > > security authentication failure rate 3 log
    > > logging buffered 51200 warnings
    > > enable secret 5 xxxxx
    > > !
    > > username Router password 7 xxxxx
    > > clock timezone EST 10
    > > clock summer-time EDT recurring last Sun Oct 2:00 last Sun Mar 3:00
    > > no aaa new-model
    > > ip subnet-zero
    > > no ip source-route
    > > ip wccp version 1
    > > ip wccp outbound-acl-check
    > > ip wccp web-cache redirect-list 50
    > > !
    > > !
    > > ip dhcp excluded-address 192.168.1.1 192.168.1.9
    > > !
    > > ip dhcp pool CLIENT
    > > network 192.168.1.0 255.255.255.0
    > > default-router 192.168.1.2
    > > dns-server 192.168.1.1 210.15.254.240 210.15.254.241
    > > netbios-name-server 192.168.1.1
    > > domain-name netspace.net.au
    > > update arp
    > > !
    > > !
    > > ip domain name netspace.net.au
    > > ip host openbsd 192.168.1.1
    > > ip name-server 192.168.1.1
    > > ip name-server 210.15.254.240
    > > ip name-server 210.15.254.241
    > > ip cef
    > > ip inspect audit-trail
    > > ip inspect tcp max-incomplete host 50 block-time 2
    > > ip inspect name OUTBOUND cuseeme
    > > ip inspect name OUTBOUND ftp
    > > ip inspect name OUTBOUND h323
    > > ip inspect name OUTBOUND netshow
    > > ip inspect name OUTBOUND rcmd
    > > ip inspect name OUTBOUND realaudio
    > > ip inspect name OUTBOUND rtsp
    > > ip inspect name OUTBOUND smtp
    > > ip inspect name OUTBOUND sqlnet
    > > ip inspect name OUTBOUND streamworks
    > > ip inspect name OUTBOUND tftp
    > > ip inspect name OUTBOUND tcp
    > > ip inspect name OUTBOUND udp
    > > ip inspect name OUTBOUND vdolive
    > > ip inspect name OUTBOUND icmp
    > > ip ips po max-events 100
    > > no ftp-server write-enable
    > > !
    > > !
    > > !
    > > !
    > > !
    > > !
    > > !
    > > interface Ethernet0
    > > description $FW_INSIDE$$ETH-LAN$
    > > ip address 192.168.1.2 255.255.255.0
    > > ip access-group 100 in
    > > ip nat inside
    > > ip virtual-reassembly
    > > ip route-cache flow
    > > no ip mroute-cache
    > > hold-queue 100 out
    > > !
    > > interface ATM0
    > > no ip address
    > > ip route-cache flow
    > > no ip mroute-cache
    > > atm vc-per-vp 64
    > > no atm ilmi-keepalive
    > > dsl operating-mode auto
    > > pvc 8/35
    > > encapsulation aal5mux ppp dialer
    > > dialer pool-member 1
    > > !
    > > !
    > > interface FastEthernet1
    > > no ip address
    > > duplex auto
    > > speed auto
    > > !
    > > interface FastEthernet2
    > > no ip address
    > > duplex auto
    > > speed auto
    > > !
    > > interface FastEthernet3
    > > no ip address
    > > duplex auto
    > > speed auto
    > > !
    > > interface FastEthernet4
    > > no ip address
    > > duplex auto
    > > speed auto
    > > !
    > > interface Dialer0
    > > no ip address
    > > !
    > > interface Dialer1
    > > description $FW_OUTSIDE$512K/128K ADSL to Netspace.net.au
    > > ip address negotiated
    > > ip access-group 101 in
    > > no ip proxy-arp
    > > ip wccp web-cache redirect out
    > > ip nat outside
    > > ip inspect OUTBOUND out
    > > ip virtual-reassembly
    > > encapsulation ppp
    > > ip route-cache flow
    > > dialer pool 1
    > > dialer-group 1
    > > no cdp enable
    > > ppp authentication chap pap callin
    > > ppp chap hostname xxxxx
    > > ppp chap password 7 xxxxx
    > > ppp pap sent-username xxxxx password 7 xxxxx
    > > hold-queue 224 in
    > > !
    > > ip classless
    > > ip route 0.0.0.0 0.0.0.0 Dialer1
    > > !
    > > ip http server
    > > ip http access-class 1
    > > ip http secure-server
    > > ip nat inside source list 102 interface Dialer1 overload
    > > ip nat inside source static 192.168.1.1 interface Dialer0
    > > ip nat inside source static tcp 192.168.1.1 22 interface Dialer1 22
    > > ip nat inside source static tcp 192.168.1.1 80 interface Dialer1 80
    > > ip nat inside source static tcp 192.168.1.1 21 interface Dialer1 21
    > > ip nat inside source static tcp 192.168.1.1 25 interface Dialer1 25
    > > !
    > > !
    > > logging 192.168.1.1
    > > access-list 1 permit 192.168.1.0 0.0.0.255
    > > access-list 1 deny any
    > > access-list 23 permit 192.168.1.0 0.0.0.255
    > > access-list 50 deny 192.168.1.1
    > > access-list 50 permit any
    > > access-list 100 permit ip any any
    > > access-list 101 permit udp host 210.15.254.242 eq ntp any eq ntp
    > > access-list 101 permit tcp any eq smtp any eq smtp
    > > access-list 101 permit tcp any eq www any eq www
    > > access-list 101 permit tcp any eq ftp any eq ftp
    > > access-list 101 permit tcp any eq 22 any eq 22
    > > access-list 101 permit icmp any any echo-reply
    > > access-list 101 permit icmp any any time-exceeded
    > > access-list 101 permit icmp any any unreachable
    > > access-list 101 deny ip 10.0.0.0 0.255.255.255 any
    > > access-list 101 deny ip 172.16.0.0 0.15.255.255 any
    > > access-list 101 deny ip 192.168.0.0 0.0.255.255 any
    > > access-list 101 deny ip 127.0.0.0 0.255.255.255 any
    > > access-list 101 deny ip host 255.255.255.255 any
    > > access-list 101 deny ip host 0.0.0.0 any
    > > access-list 101 deny ip any any log
    > > access-list 102 permit ip 192.168.1.0 0.0.0.255 any
    > > dialer-list 1 protocol ip permit
    > > snmp-server community cisco837 RO
    > > snmp-server enable traps tty
    > > !
    > > control-plane
    > > !
    > > !
    > > line con 0
    > > exec-timeout 120 0
    > > no modem enable
    > > transport preferred all
    > > transport output all
    > > stopbits 1
    > > line aux 0
    > > transport preferred all
    > > transport output all
    > > line vty 0 4
    > > access-class 23 in
    > > exec-timeout 120 0
    > > login local
    > > length 0
    > > transport preferred all
    > > transport input ssh
    > > transport output all
    > > !
    > > scheduler max-task-time 5000
    > > scheduler interval 500
    > > sntp server 210.15.254.242
    > > end
    > >
    > >
    > >
    > > --
    > > Cheers,
    > > Jason
    > >
    > > Note: Use ROT13 to decipher my email address
    > >
    > >
    > >

    >
    >
    Jason, Jul 1, 2004
    #3
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. BinSur
    Replies:
    4
    Views:
    5,770
    BinSur
    Jan 13, 2006
  2. Natan
    Replies:
    3
    Views:
    4,049
    Natan
    Apr 28, 2006
  3. eprice01
    Replies:
    0
    Views:
    544
    eprice01
    May 8, 2006
  4. opietexas
    Replies:
    0
    Views:
    4,053
    opietexas
    Jul 6, 2006
  5. opietexas
    Replies:
    0
    Views:
    447
    opietexas
    Jul 6, 2006
Loading...

Share This Page