Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Cisco Router 1800 WAN interface is getting freeze

Reply
Thread Tools

Cisco Router 1800 WAN interface is getting freeze

 
 
Nicholas Alpha Nicholas Alpha is offline
Junior Member
Join Date: Jan 2013
Posts: 1
 
      01-19-2013
Weird issue with Cisco 1800 router these days, any help in this regard will be appreciated.

Problem Description #
Router WAN interface FA0/1 is getting down after every 2/3 days

Troubleshoot#
When i check the interface logs i found line protocol & interface up but unless i pass parameter shut & no shut on the interface there is no traffic flow

Logs: WAN Interface
FastEthernet0/1 is up, line protocol is up
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 161000 bits/sec, 116 packets/sec
5 minute output rate 541000 bits/sec, 140 packets/sec
6142160 packets input, 1638033216 bytes
Received 23757 broadcasts, 0 runts, 0 giants, 0 throttles
38164561 input errors, 1536 CRC, 0 frame, 4 overrun, 0 ignored
0 watchdog
0 input packets with dribble condition detected
6403039 packets output, 2458614831 bytes, 0 underruns
0 output errors, 0 collisions, 4 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out

LOGS: LAN INTERFACE

FastEthernet0/0 is up, line protocol is up
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Half-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 413000 bits/sec, 121 packets/sec
5 minute output rate 138000 bits/sec, 96 packets/sec
6315182 packets input, 2463323708 bytes
Received 115 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog
0 input packets with dribble condition detected
6102932 packets output, 1631248690 bytes, 0 underruns
24933 output errors, 23252 collisions, 24905 interface resets
0 unknown protocol drops
0 babbles, 24979 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
 
Reply With Quote
 
 
 
 
tpheuk tpheuk is offline
Junior Member
Join Date: Jan 2013
Posts: 12
 
      01-19-2013
reliability 255/255, txload 1/255, rxload 1/255

38164561 input errors, 1536 CRC, 0 frame, 4 overrun, 0 ignored

have you call vendor for check... the problem caused form provider side
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to open a port on a Cisco 1800 series router Jason Cisco 1 02-19-2008 02:29 PM
Site to Site VPN error on Cisco ASA5500 and router 1800 Young Cisco 3 01-09-2008 02:10 PM
Problem with Cisco Router 1700 and 1800 simba Hardware 2 09-25-2007 07:24 PM
Setting up a router with 29 Global IPs, BUT can't ping router internal interface from server or server interface from router war_wheelan@yahoo.com Cisco 1 12-14-2005 03:31 PM
How to configure an analog Backup connection on Cisco 1800 Router ? Kai Cisco 1 12-13-2004 11:20 AM



Advertisments