«

[tekkie140]

Hi,

We have the following setup on a Cisco 3560 switch to accommodate content filtering. The filtering fails and the vendor claims the port monitoring is not configured properly. Can someone help me out?


! IOS 12.2(55)SE5
!
interface FastEthernet0/35
description ***** mirror port *****
switchport mode access
switchport voice vlan 200
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
mls qos trust cos
auto qos voip trust
spanning-tree portfast
!
.....
interface FastEthernet0/48
description ***** Uplink to ASA FireWall *****
spanning-tree portfast
!
.....
!
monitor session 1 source interface Fa0/48
monitor session 1 destination interface Fa0/35



# show monitor
Session 1
---------
Type : Local Session
Source Ports :
Both : Fa0/48
Destination Ports : Fa0/35
Encapsulation : Native
Ingress : Disabled



# show monitor detail
Session 1
---------
Type : Local Session
Description : -
Source Ports :
RX Only : None
TX Only : None
Both : Fa0/48
Source VLANs :
RX Only : None
TX Only : None
Both : None
Source RSPAN VLAN : None
Destination Ports : Fa0/35
Encapsulation : Native
Ingress : Disabled
Filter VLANs : None
Dest RSPAN VLAN : None

#

Thanks!