«

[tssimexico]

HI
We have some problems in production line with the download image process..
the network is configured with one cisco router 1800 ( 192.168.1.1 ) and next we connect a ppal switch catalyst 4506 ( 192.168.1.46 ) .. in this switch we have 2 vlans runing Vlan 1 (network 192 - office ) and Vlan 12 ( network 30-producction)
next we put a cisco Catalyst 6513 ( 30.0.1.22) and other catalyst 4506 ( 30.0.1.202) connect with fiber at the cisco catalyst 46..

The behavior of the catalyst 6513 its very faster for download but the other switch ( 30.0.1.202 ) its very slow .. how can we do for that this catalyst 4506 works better for download .. WE appreciate your support
Best Regards

[talib]

Recently I have configured Remote client vpn on asa when i am doing nat to access internet after that we are not able to access our local network. config as below.


ip local pool NJ_VPN 10.10.11.1-10.10.11.254 mask 255.255.255.0

access-list nonat extended permit ip 10.10.10.0 255.255.255.0 10.10.11.0 255.255.255.0

global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
nat (outside) 1 10.10.11.0 255.255.255.0