Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Programming > Perl > Perl Misc > IIS 6.0 perl problem

Reply
Thread Tools

IIS 6.0 perl problem

 
 
Kevin_S
Guest
Posts: n/a
 
      09-07-2006
Hello,

Have done quit a bit of searching and reading but can't find my problem
yet. I am moving our corporate intranet from an old NT4 server to a
2003 Server. Everything is working fine except for a little perl
application in/out board we run.

Application website:
http://www.uburst.com/uSignIn

I am getting a 404 page not found error, which according to their
troubleshooting is usually because of 1 of 4 things. I have tried to
go through the "4 things" and still can't find my problem.

http://www.uburst.com/uSignIn/troubleshooting.html

Unfortunately that page and their "support forum" which has turned into
a knowledge base didn't solve the problem for me. I have also tried
following the troubleshooting steps for IIS outlined on the activeperl
website here:
http://aspn.activestate.com/ASPN/doc...nfigure_IIS_60

Again, everything seemed to check out.

I cannot run a simple test script as outlined in the troubleshooting.

If I go to the cmd prompt I can run "perl -v" and get the proper
output, that I am running activeperl v5.8.7, etc...

I have to be missing a permission or missing a setting to make scripts
allowed somewhere right?

Right now my scripts are located at d:\wwwroot\cgi-bin.
I have temporarily given IUSR...xxxxxxxx full control over the cgi-bin
and wwwroot folders.
The cgi-bin directories "Execute Permissions" are set to "Scirpts &
Executables".

Anyone got any ideas on where to start or how to further narrow down my
problem?
PS - I'm a total perl amatuer, I only installed it once before, and
that was to run this third party app.

 
Reply With Quote
 
 
 
 
Tad McClellan
Guest
Posts: n/a
 
      09-07-2006
Kevin_S <(E-Mail Removed)> wrote:

> If I go to the cmd prompt I can run "perl -v" and get the proper
> output
>
> I have to be missing a permission or missing a setting to make scripts
> allowed somewhere right?



Right.


> Anyone got any ideas on where to start



comp.infosystems.www.servers.ms-windows


> or how to further narrow down my
> problem?



You can eliminate Perl as the cause of the problem.

You do not have a Perl problem, you have a web server configuration
problem.

Web server configuration is off-topic in the Perl newsgroup.


--
Tad McClellan SGML consulting
http://www.velocityreviews.com/forums/(E-Mail Removed) Perl programming
Fort Worth, Texas
 
Reply With Quote
 
 
 
 
Kevin_S
Guest
Posts: n/a
 
      09-07-2006
Thanks, I'll try a MS Server or IIS newsgroup.


Tad McClellan wrote:
> Kevin_S <(E-Mail Removed)> wrote:
>
> > If I go to the cmd prompt I can run "perl -v" and get the proper
> > output
> >
> > I have to be missing a permission or missing a setting to make scripts
> > allowed somewhere right?

>
>
> Right.
>
>
> > Anyone got any ideas on where to start

>
>
> comp.infosystems.www.servers.ms-windows
>
>
> > or how to further narrow down my
> > problem?

>
>
> You can eliminate Perl as the cause of the problem.
>
> You do not have a Perl problem, you have a web server configuration
> problem.
>
> Web server configuration is off-topic in the Perl newsgroup.
>
>
> --
> Tad McClellan SGML consulting
> (E-Mail Removed) Perl programming
> Fort Worth, Texas


 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
FAQ 1.4 What are Perl 4, Perl 5, or Perl 6? PerlFAQ Server Perl Misc 0 02-27-2011 11:00 PM
FAQ 2.17 What is perl.com? Perl Mongers? pm.org? perl.org? cpan.org? PerlFAQ Server Perl Misc 0 02-03-2011 11:00 AM
FAQ 1.4 What are Perl 4, Perl 5, or Perl 6? PerlFAQ Server Perl Misc 0 01-23-2011 05:00 AM
Perl Help - Windows Perl script accessing a Unix perl Script dpackwood Perl 3 09-30-2003 02:56 AM
.NET IIS to IIS credentials problem... Grind Boy ASP .Net 4 08-14-2003 12:59 PM



Advertisments