«

Hi, all,

A simple question:
1. A layer 2 Catalyst switch with different VLANs configured.
2. A trunk configured in a switch port
3. A windows workstation with only one NIC
4. The workstation is connected to this trunk port.

Questions:
1. If different IP addresses to the workstation ( one NIC only )
2. can this workstation work ( this workstation connected to a switch
trunk port )?
3. can this workstation go to these different IP subnets ?
4. Can these IP subnets communicate with each other ( via the
workstation as router ) ?

The wise enlightened me with:
> Hi, all,
>
> A simple question:
> 1. A layer 2 Catalyst switch with different VLANs configured.
> 2. A trunk configured in a switch port
> 3. A windows workstation with only one NIC
> 4. The workstation is connected to this trunk port.
>
> Questions:
> 1. If different IP addresses to the workstation ( one NIC only )

Is that a question?

> 2. can this workstation work ( this workstation connected to a switch
> trunk port )?

yes, if the operating system/driver supports this and you configure it
correctly

> 3. can this workstation go to these different IP subnets ?

yes, if the operating system/driver supports this and you configure it
correctly

> 4. Can these IP subnets communicate with each other ( via the
> workstation as router ) ?

yes, if the operating system/driver supports this and you configure it
correctly

Mark

On 1月10日, 下�4時05分, Mark Huizer <xaa+news_comp.dcom.sys.ci...@dohd.org>
wrote:
> The wise benson...@yahoo.com.hk enlightened me with:
>
> > Hi, all,
>
> > A simple question:
> > 1. A layer 2 Catalyst switch with different VLANs configured.
> > 2. A trunk configured in a switch port
> > 3. A windows workstation with only one NIC
> > 4. The workstation is connected to this trunk port.
>
> > Questions:
> > 1. If different IP addresses to the workstation ( one NIC only )
>
> Is that a question?
>
> > 2. can this workstation work ( this workstation connected to a switch
> > trunk port )?
>
> yes, if the operating system/driver supports this and you configure it
> correctly
>
> > 3. can this workstation go to these different IP subnets ?
>
> yes, if the operating system/driver supports this and you configure it
> correctly
>
> > 4. Can these IP subnets communicate with each other ( via the
> > workstation as router ) ?
>
> yes, if the operating system/driver supports this and you configure it
> correctly
>
> Mark

Hi,
Thanks for the answers.

Want to know more:
1. in Q4, if workstation is as router between these subnets by
default ?
2. How can I configure the workstation for only the workstation can
communicate with these individual subnets, but other hosts in these
subnets can not communicate each other ?

Thanks a lot

schrieb:
>>> 4. Can these IP subnets communicate with each other ( via the
>>> workstation as router ) ?
>>
>> yes, if the operating system/driver supports this and you configure it
>> correctly
>>
>
> Want to know more:
> 1. in Q4, if workstation is as router between these subnets by
> default ?

You should understand the difference between a physical NIC and logical
NICs for each configured 802.1q VLAN first.

If the O/S is forwarding packets between different logical
NICs/interfaces depends. By default Windows does NOT route.


> 2. How can I configure the workstation for only the workstation can
> communicate with these individual subnets, but other hosts in these
> subnets can not communicate each other ?

Access-lists.

--
ULi

On 1月12日, 上�2時21分, Uli Link<VonRechts.NachLi...@usenet.arcornews.de>
wrote:
> benson...@yahoo.com.hk schrieb:
>
> >>> 4. Can these IP subnets communicate with each other ( via the
> >>> workstation as router ) ?
>
> >> yes, if the operating system/driver supports this and you configure it
> >> correctly
>
> > Want to know more:
> > 1. Â*in Q4, if workstation is as router between these subnets by
> > default ?
>
> You should understand the difference between a physical NIC and logical
> NICs for each configured 802.1q VLAN first.
>
> If the O/S is forwarding packets between different logical
> NICs/interfaces depends. By default Windows does NOT route.
>
> > 2. Â*How can I configure the workstation for only the workstation can
> > communicate with these individual subnets, but other hosts in these
> > subnets can not communicate each other ?
>
> Access-lists.
>
> --
> ULi


Hi,
For the answer "Access-list"; you mean ACL in Switch or workstation ?

1. Switches are configured in Layer 2 and no inter-VLAN route in the
whole network environment, what ACL is applied ?
if ACL in windows platform, May I know how to create a ACL in
windows since I never do a ACL in window ?

2. What is the checklist in windows system/driver in order to enable
the NIC drive supports
2.1 "4. Can these IP subnets communicate with each other ( via the
workstation as router ) ?
yes, if the operating system/driver supports this and you
configure it
correctly "


Thanks for the help