Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Programming > Python > [OT] Anyone here familiar with installing Open Watcom F77?

Reply
Thread Tools

[OT] Anyone here familiar with installing Open Watcom F77?

 
 
W. eWatson
Guest
Posts: n/a
 
      09-05-2011
See Subject.
 
Reply With Quote
 
 
 
 
Chris Angelico
Guest
Posts: n/a
 
      09-05-2011
On Tue, Sep 6, 2011 at 1:15 AM, W. eWatson <(E-Mail Removed)> wrote:
> See Subject.
> --
> http://mail.python.org/mailman/listinfo/python-list
>


To what extent "familiar"? I have it installed on several computers,
but only because it comes with Open Wat C/C++.

With something off-topic like this, it might be better to have a real
email address, so the responses can be off-list.

ChrisA
 
Reply With Quote
 
 
 
 
W. eWatson
Guest
Posts: n/a
 
      09-05-2011
On 9/5/2011 8:24 AM, Chris Angelico wrote:
> On Tue, Sep 6, 2011 at 1:15 AM, W. eWatson<(E-Mail Removed)> wrote:
>> See Subject.
>> --
>> http://mail.python.org/mailman/listinfo/python-list
>>

>
> To what extent "familiar"? I have it installed on several computers,
> but only because it comes with Open Wat C/C++.
>
> With something off-topic like this, it might be better to have a real
> email address, so the responses can be off-list.
>
> ChrisA


sierra_mtnview @ sbcglobal.net
Here's the story.

As far as I can tell F77 1.8 is not available. I've Googled quite a bit
for it. My source for 1.9 is
<http://www.openwatcom.org/index.php/Download>. It gives me:
open-watcom-f77-win32-1.9.exe.

When I install, there are only choices: Custom, which presumably will
ask a lot of questions, and some one shot do-it without any
intervention. I took the latter.

...., XP, and no Win7? I use Win7. Trouble??

Something is amiss with my install. I downloaded 1.9. I did not use any
customization.

I can bring up the IDE easily. Using it is a different matter. The
only Getting Started in F77 manual I can find is shown as v1.8. If 1.9
is needed, I can't find it. If I use the 1.8 manual, then the contents
don't match up with what I find in the F77 IDE. For example, the manual
talks about a Kitchen project on page 15. Not found anywhere in the
install folder.

 
Reply With Quote
 
Dan Nagle
Guest
Posts: n/a
 
      09-05-2011
Hello,

On 2011-09-05 16:15:20 +0000, W. eWatson said:

> On 9/5/2011 8:24 AM, Chris Angelico wrote:
>> On Tue, Sep 6, 2011 at 1:15 AM, W. eWatson<(E-Mail Removed)> wrote:
>>> See Subject.


<snip>

>>> To what extent "familiar"? I have it installed on several computers,

>> but only because it comes with Open Wat C/C++.
>>
>> With something off-topic like this,


<snip>

>> sierra_mtnview @ sbcglobal.net

> Here's the story.
>
> As far as I can tell F77 1.8 is not available. I've Googled quite a
> bit for it. My source for 1.9 is
> <http://www.openwatcom.org/index.php/Download>. It gives me:
> open-watcom-f77-win32-1.9.exe.


On Usenet, comp.lang.fortran might be the best source of help for this.
There's a good chance one of the regulars there can answer you
within one or two posts. (I'll not cross-post, you can choose for yourself.)

HTH

--
Cheers!

Dan Nagle

 
Reply With Quote
 
Colin J. Williams
Guest
Posts: n/a
 
      09-05-2011
On 05-Sep-11 12:22 PM, Dan Nagle wrote:
> Hello,
>
> On 2011-09-05 16:15:20 +0000, W. eWatson said:
>
>> On 9/5/2011 8:24 AM, Chris Angelico wrote:
>>> On Tue, Sep 6, 2011 at 1:15 AM, W. eWatson<(E-Mail Removed)>
>>> wrote:
>>>> See Subject.

>
> <snip>
>
>>>> To what extent "familiar"? I have it installed on several computers,
>>> but only because it comes with Open Wat C/C++.
>>>
>>> With something off-topic like this,

>
> <snip>
>
>>> sierra_mtnview @ sbcglobal.net

>> Here's the story.
>>
>> As far as I can tell F77 1.8 is not available. I've Googled quite a
>> bit for it. My source for 1.9 is
>> <http://www.openwatcom.org/index.php/Download>. It gives me:
>> open-watcom-f77-win32-1.9.exe.

>
> On Usenet, comp.lang.fortran might be the best source of help for this.
> There's a good chance one of the regulars there can answer you
> within one or two posts. (I'll not cross-post, you can choose for
> yourself.)
>
> HTH
>


You might get in touch with someone at Waterloo University, which is
located in Kitchener/Waterloo.

This could have come from the 60's or 70's.

Good luck.

Colin W.

 
Reply With Quote
 
W. eWatson
Guest
Posts: n/a
 
      09-08-2011
On 9/5/2011 9:36 AM, Colin J. Williams wrote:
> On 05-Sep-11 12:22 PM, Dan Nagle wrote:
>> Hello,
>>
>> On 2011-09-05 16:15:20 +0000, W. eWatson said:
>>
>>> On 9/5/2011 8:24 AM, Chris Angelico wrote:
>>>> On Tue, Sep 6, 2011 at 1:15 AM, W. eWatson<(E-Mail Removed)>
>>>> wrote:
>>>>> See Subject.

>>
>> <snip>
>>
>>>>> To what extent "familiar"? I have it installed on several computers,
>>>> but only because it comes with Open Wat C/C++.
>>>>
>>>> With something off-topic like this,

>>
>> <snip>
>>
>>>> sierra_mtnview @ sbcglobal.net
>>> Here's the story.
>>>
>>> As far as I can tell F77 1.8 is not available. I've Googled quite a
>>> bit for it. My source for 1.9 is
>>> <http://www.openwatcom.org/index.php/Download>. It gives me:
>>> open-watcom-f77-win32-1.9.exe.

>>
>> On Usenet, comp.lang.fortran might be the best source of help for this.
>> There's a good chance one of the regulars there can answer you
>> within one or two posts. (I'll not cross-post, you can choose for
>> yourself.)
>>
>> HTH
>>

>
> You might get in touch with someone at Waterloo University, which is
> located in Kitchener/Waterloo.
>
> This could have come from the 60's or 70's.
>
> Good luck.
>
> Colin W.
>

Left a message on Tuesday. No return call. I'm starting to make progress
on this.
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Anyone here familiar with Mikrotik RouterOS? fonestar General Computer Support 0 01-10-2011 10:28 PM
Open Watcom Nickolai Leschov C Programming 6 09-23-2008 06:29 PM
Is there anyone here familiar with borland j++? nukleus Java 4 01-30-2007 01:56 AM
Open Watcom bob@coolgroups.com C++ 0 02-13-2006 09:28 AM
Open watcom supporting C++ STL =?ISO-8859-1?Q?Philipp_Cla=DFen?= C++ 1 09-01-2003 08:29 PM



Advertisments