«

I bought a DLink-524 wireless router, because I am getting another computer
and a laptop and I wanted to share the network. I am running AOL with
Broadband DSL which I have had for some time with no problems. Here is the
setups (Like I said I am new to routers) DSL modem > Router > Computer (As
the manual said).

There is an ip to connect to to configure the router. I can get there no
problem, and configure it (pppoe). But it doesn't connect. It seems that the
only way I can connect to the internet is directly from the modem to my
computer. Am I missing something here? All the cables and lines work, and I
am up-to-date with my Firmware. I read somewhere that AOL doesn't like MTU
above 1400, so it's set at 1400 (no Idea what it is).

Anyone have any idea of what I can do here? I would gladly provide any/all
further information about my computer to see how to do this.

(NOTE: My dsl modem is dual connect, so I was wondering...if I connect it
with the USB to my computer, and then the ethernet to the router, would it
work?)

(Another NOTE: This is only the server computer, I haven't even begun the
'wireless' aspect of it yet)

Chris wrote:

> I bought a DLink-524 wireless router, because I am getting another
> computer and a laptop and I wanted to share the network. I am running
> AOL with Broadband DSL which I have had for some time with no
> problems. Here is the setups (Like I said I am new to routers) DSL
> modem > Router > Computer (As the manual said).
>
(snip right after reading the bit about OP using AOL)

AOL does not use the accepted standards for their broadband that
everyone else in the world does. Only certain router hardware works
with AOL (and I'm sorry, but I don't know which ones). You will need to
contact AOL tech support for instructions how to use a router with
their broadband service. This is not a Windows issue; it is purely
AOL's fault for not adhering to accepted standards, just like with
their dialup.

Malke
--
Elephant Boy Computers
www.elephantboycomputers.com
"Don't Panic!"
MS-MVP Windows - Shell/User

Yeah, AOL sucks. Thanks Ill contact tech support.

"Malke" wrote:

> Chris wrote:
>
> > I bought a DLink-524 wireless router, because I am getting another
> > computer and a laptop and I wanted to share the network. I am running
> > AOL with Broadband DSL which I have had for some time with no
> > problems. Here is the setups (Like I said I am new to routers) DSL
> > modem > Router > Computer (As the manual said).
> >
> (snip right after reading the bit about OP using AOL)
>
> AOL does not use the accepted standards for their broadband that
> everyone else in the world does. Only certain router hardware works
> with AOL (and I'm sorry, but I don't know which ones). You will need to
> contact AOL tech support for instructions how to use a router with
> their broadband service. This is not a Windows issue; it is purely
> AOL's fault for not adhering to accepted standards, just like with
> their dialup.
>
> Malke
> --
> Elephant Boy Computers
> www.elephantboycomputers.com
> "Don't Panic!"
> MS-MVP Windows - Shell/User
>

aol being aol (opinians with-held)

only support the netgear routers there are ways of setting other
routers up with formentioned ISP but much searching needs to be done to
fine settings also i am told you have to be on gold service otherwise
it disconnects when more than one computer conncets.... great eh?

AOL more expensive than most overs
AOL more restricing than others
AOL help line no longer free or in the uk
AOL isnt it time to switch ISP

I never liked AOL

question...is it the @aol.com that is blocked, or only the aol software?
Because I use the windows dialer from time to time(Start>Control
Panel>Network Connections), when I don't want waol.exe eating up my memory.
Is there something I can do there? Or is it the fact that I am subscribed to
aol, or that I am using the software? Hmmmmmmmmmmmmm

Thanks again.

"pragi" wrote:

> aol being aol (opinians with-held)
>
> only support the netgear routers there are ways of setting other
> routers up with formentioned ISP but much searching needs to be done to
> fine settings also i am told you have to be on gold service otherwise
> it disconnects when more than one computer conncets.... great eh?
>
> AOL more expensive than most overs
> AOL more restricing than others
> AOL help line no longer free or in the uk
> AOL isnt it time to switch ISP
>
>

As a medium to large local independent computer shop I am constantly
amazed.

I need to get out more.

In the process of replacing lightning-struck hardware, I discovered that
the DSL modems that my ISP (Earthlink) provides these days are, by
default, configured as one-port routers, with built-in DHCP server, NAT,
and PPPoE client. The upside, from the ISP's point of view is that when
a user with one PC connects thusly: DSL line > modem > computer, the NAT
feature of the modem/router protects the user who neglects to turn on a
firewall. The downside -- from the point of view of a user who wants to
have an internal network -- is that the router PPPoE client can't get an
IP address through the modem. (As an aside, you apparently can connect
multiple PCs to the modem via a hub or switch -- not a router -- but
when PC #2 tries to connect, it will disconnect PC#1, so you can only
have on PC connected at a time).

The solution is to set the modem to bridge mode -- which is how the
early DSL modems usually were supplied -- and then the router's PPPoE
client works as expected.

So, Chris, if you haven't figured this out yet, what brand of DSL modem
do you have? And did AOL ever tell you an IP address to use to
configure the modem (not the router)?

Chris wrote:
> I bought a DLink-524 wireless router, because I am getting another computer
> and a laptop and I wanted to share the network. I am running AOL with
> Broadband DSL which I have had for some time with no problems. Here is the
> setups (Like I said I am new to routers) DSL modem > Router > Computer (As
> the manual said).
>
> There is an ip to connect to to configure the router. I can get there no
> problem, and configure it (pppoe). But it doesn't connect. It seems that the
> only way I can connect to the internet is directly from the modem to my
> computer. Am I missing something here? All the cables and lines work, and I
> am up-to-date with my Firmware. I read somewhere that AOL doesn't like MTU
> above 1400, so it's set at 1400 (no Idea what it is).
>
> Anyone have any idea of what I can do here? I would gladly provide any/all
> further information about my computer to see how to do this.
>
> (NOTE: My dsl modem is dual connect, so I was wondering...if I connect it
> with the USB to my computer, and then the ethernet to the router, would it
> work?)
>
> (Another NOTE: This is only the server computer, I haven't even begun the
> 'wireless' aspect of it yet)