Hello,
Great forum here - I want to butt heads and see if I can't get my equipment to do what I want. I have a WRT54G with DD-WRT put on it and a Cisco Catalyst 2950 24 port switch. I have two VLANS setup - VLAN 1 which has clients with the 192.168.1.x subnet and VLAN 2 which has the 10.0.0.x subnet. I want to make it where VLAN 1 cannot ping VLAN 2. VLAN 2 cannot ping any host on VLAN 1, but any host on VLAN 1 can ping any host on VLAN 2. I want to cut all communication between the two VLANs and make it where any hosts on VLAN 2 can only communicate with the WRT54G via the trunk port I have configured on the 2950. I've looked around and have tried implementing some ACLs on the 2950 to no avail; I don't want to mess with the WRT54G using firewalls and what not because the Catalyst 2950 supports ACLs. I've read a lot of forum posts regarding what I want to do but I can't find an answer that works for me.
Your guidance would greatly be appreciated
Similar Threads
