«

"g" wrote in message news:NLYAo.19063$...

The desktops we have in office are HP Compaq dc7600 Convertible
Minitower or HP xw4600 Workstation and a Dell Optiplex 980. The laptops
are mainly Dell latitude 510, HP Compaq 2710p. Any suggestions for a
toolkit which can open parts of these machines? Would the ones at
http://tinyurl.com/2ctcx8m and http://tinyurl.com/2dslxc9 be OK?

The components which can be be plugged using the extension cord could be
a camcorder, projector, laptop or a desktop. Any ideas for a suitable
one, though I guess most shown at
http://www.amazon.com/b?ie=UTF8&node=495312 would fit our needs. We will
not be using the extension cord in a damp environment.



Two comments:

1: those kits are a waste of time, often of poor quality and contain tools
you are unlikely to ever use.
eg The IC puller, how long has it been since the average PC had IC's plugged
into sockets?

2: Apart from one Philips head and one Slot head screw drivers you should
not need anything else as most of those type of PC's are pretty much catches
and levers to get them apart.

Best
Paul.