Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Pix 515 Configuring Multiple External Interfaces

Thread Tools

Pix 515 Configuring Multiple External Interfaces

Posts: n/a
I have a total of 3 physical interfaces. 2 of them external and one
One external interface ip is The other external interface ip
The internal interface ip is

I have successfully setup all inside traffic going out to wan to be routed
through external interface ip192.168.3.3.
Now, I would like to route from inside to through external
interface ip and the rest of the outside traffic should be
routed through external interface ip ip192.168.3.3.

How can I accomplish that? Thanks in advance.

natfg is
tpfg is
inside is

global (natfg) 1 interface
nat (inside) 1
nat (inside) 1
nat (inside) 1
static (inside,tpfg) tcp https https netmask
static (inside,tpfg) tcp smtp smtp netmask
access-group workstations in interface inside
access-group inbound in interface tpfg
route natfg 1

Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Configuring multiple sip outbound proxy on different Cisco 28xx interfaces edo UK VOIP 1 04-04-2007 06:03 PM
PIX 515 - can Use VPN300 Client and PIX-to-PIX VPN at the same time? Stephen M Cisco 1 11-14-2006 02:03 PM
PIX 515 to PIX 515 via Internet & IPSec, should I get a VAC? Scott Townsend Cisco 8 02-22-2006 09:59 PM
PIX 515 Switch 8 External IPs Mr Corbett Cisco 3 10-25-2005 01:42 PM
PIX - Configuring External CA on failover setup Andy M Cisco 0 06-22-2005 02:00 PM