«

[geek98]

When I pull up the web page of my Cisco ASA 5505 it promps with a username and password from IE. The username and password is to authenticate you to even get the page to come up. im not even getting into the ASDM page. I have done a configure factory-default and write mem several times and it still doesnt work. below is my current config.


ciscoasa(config)# sho run
: Saved
:
ASA Version 7.2(4)
!
hostname ciscoasa
domain-name default.domain.invalid
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-615.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!
dhcpd address 192.168.1.2-192.168.1.254 inside
dhcpd enable inside
!

!
!
prompt hostname context
Cryptochecksum:8795ea8e4fbc763f50ab4a58b2342827
: end
ciscoasa(config)#

As you can see the box is basically at the factory defaults. Does anyone know how i can get past the prompt for a username and password to authenticate to even get to the web page. I have tried entering the enable passwork while leaving the username blank and i have tried leaving both blank and it still wont go in. I dont even get to the page where i can install the ASDM client or run it in JAVA. I have been to this page in the past on this particular ASA i just cant anymore. Can anyone shed some light on this. I am not real good with CLI commands so any help you can give me would be great.

Thanks

[geek98]

Here is what i get when trying to access the page from Firefox.

404 Not Fount
the requested URL. /admin/index.html was not found on this server.


When i purposely enter the wrong password it just keeps asking for a passwrod till i try to many times. When i enter the correct password i imediately get the 404 not Found error. I really need to get this thing working. I have been into it in the past and that is why i dont understand why it isnt working.