Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > vpn Client connects fine, but no access

Thread Tools

vpn Client connects fine, but no access

atidafe atidafe is offline
Junior Member
Join Date: Apr 2010
Posts: 1
Im trying to setup my pix515e for a vpn client. I tried to use the pdm an now im trully confused as to why its not working. the client connects but the client cannot access the pc in the office.

Local ip 192.168.251.x
remote pool 192.168.200.x

I would like the client to have access to the entire 192.168.251.x

Here is the config: (atleast the main parts)

access-list nonat permit ip any
access-list outside_cryptomap_dyn_20 permit ip any
ip local pool mmds2
nat (inside) 0 access-list nonat
crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
isakmp enable outside
isakmp identity address
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption des
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption aes-256
isakmp policy 20 hash sha
isakmp policy 20 group 5
isakmp policy 20 lifetime 3600
isakmp policy 40 authentication pre-share
isakmp policy 40 encryption 3des
isakmp policy 40 hash md5
isakmp policy 40 group 2
isakmp policy 40 lifetime 86400
vpngroup mmdsnrv address-pool mmds2
vpngroup mmdsnrv idle-time 1800
vpngroup mmdsnrv password ********

Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
PIX VPN Client connects but not traffic passes through rambur Cisco 5 04-25-2007 03:52 AM
Cisco vpn client 4.8 connects but cannot send or receive Cisco 0 01-18-2007 03:45 PM
Cisco VPN client connects but can't ping or connect to anything? ronnieshih Cisco 1 11-28-2006 11:05 AM
Cisco VPN Client connects but no traffic passes through. Mephesto Cisco 0 06-24-2005 04:24 PM
Cisco VPN Client 4.04 Rel to a PIX 506E connects, but no traffic GlenMorgan Cisco 13 02-22-2005 07:11 PM