«

I have installed a 3Com pc card WLAN card on my NB. 3Com software runs
automatically everytime when the system boots up and the WZC does not start.
I need to manually start WZC. Is there any way to force the system to run
WZC and stop 3Com software?

Thanks,

Ray

you could try and open regedit and locate
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Run
you will probably find the 3Com executable, try to remove it (you can export
the list first as a backup)
open the services window (control panel - administrative tools) make sure
that the WZC service is set to start automatic and that it is started, open
properties of your adapter and select "use windows to configure my wireless
network settings". That usually is enough to make it work (though I don't
have a 3com adapter)

/Niklas

"Ray" <NoSpam-> wrote in message
news:...
>I have installed a 3Com pc card WLAN card on my NB. 3Com software runs
>automatically everytime when the system boots up and the WZC does not
>start. I need to manually start WZC. Is there any way to force the system
>to run WZC and stop 3Com software?
>
> Thanks,
>
> Ray
>

Niklas,

Thanks for your useful advice.

Ray

"Niklas" <> wrote in message
news:...
> you could try and open regedit and locate
> HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Run
> you will probably find the 3Com executable, try to remove it (you can
> export the list first as a backup)
> open the services window (control panel - administrative tools) make sure
> that the WZC service is set to start automatic and that it is started,
> open properties of your adapter and select "use windows to configure my
> wireless network settings". That usually is enough to make it work (though
> I don't have a 3com adapter)
>
> /Niklas
>
> "Ray" <NoSpam-> wrote in message
> news:...
>>I have installed a 3Com pc card WLAN card on my NB. 3Com software runs
>>automatically everytime when the system boots up and the WZC does not
>>start. I need to manually start WZC. Is there any way to force the system
>>to run WZC and stop 3Com software?
>>
>> Thanks,
>>
>> Ray
>>
>
>

[stanleysteny]

hi, i have the same problem
i have 2 Pc and one Laptop, always when i switch on, i need to go to services to strt WZC. and in properties of your adapter dont have the TAB "use windows to configure my wire wireless network settings"onley two tab - General and Advanced.
St