Four bonded T1s NM-4T1-IMA ?

sp3gcf

Junior Member

Join Date: Nov 2007

Posts: 7

03-10-2010

I'm upgrading from one T1 to 4 bonded T1s via PPP-Multilink on Cisco 3745 platform.
My question is what type of module should I use to get this working?
I found NM-4T1-IMA, but it seems to work only with ATM, not PPP-Multilink. I know that I could use four WIC-CSU-T1 cards, but I would to prefer have one card installed instead four.

Thanks,
Tom

Last edited by sp3gcf; 03-10-2010 at 06:39 PM..

Thread Tools
Show Printable Version Email this Page

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are Off Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Canon EIS mirrorless system - Four Thirds, but not Four Thirds!	Bruce	Digital Photography	31	09-25-2010 05:38 AM
hardware for bonded dsl connections....	Captain	Cisco	4	11-04-2008 08:12 PM
Bonded T1s from different carriers?	Joe Matuscak	Cisco	0	01-03-2006 06:48 PM
Cisco 6130 with Bonded T1s	Ken Bettis	Cisco	1	07-07-2004 04:41 AM
Four T1s - 2 ISPs - One 7200 - Solution?	SJ	Cisco	1	05-13-2004 12:46 PM