You are being too vague, do both computers have the exact address or vary by
the last number only?
Netbios is on the TCP/IP Properties-advanced-wins. "Use Netbios over
TCP/IP", but if you can't ping just the address, that is not a problem yet.
That router allows you to ping an address from the router, so you might try
that to see if it can talk to both computers. Can you get to the router
setup page OK? Can you ping just the router-192.168.1.1? All this pinging
is just trying to find out where you have connectivity. When you get it so
it will ping, you are close to a solution. There may be a situation where
the pings (ICMP) are being blocked by something such as a firewall. It
doesn't look like the router security would be causing you problems, so you
can leave it alone.
Sometimes shutting everything down and rebooting will help (bring back
router first). Did you look into the Norton situation?
http://support.microsoft.com/default...b;en-us;308007
Clark
"David Carlson" <> wrote in message
news:760B1B29-BE53-40E2-8899-...
> When I check the IP addresses on both computers they come up with the same
> thing: 192.168.*.*** All packets are dropped when trying to ping from one
> to
> the other. File & print sharing is enabled as well as TCP/IP, but I can't
> find NetBIOS to install. I have disabled all firewalls. How would I
> unplug
> from the net? Just unplug the cable modem but keep the pc's connected via
> the router? I have the Linksys Wireless-G Broadband Router and I'm not
> sure
> how to disable the firewall if it has one. Thank you very much for
> helping
> me "Clark".
>
> "Clark" wrote:
>
>> There have been several issues with Norton and connectivity, so you might
>> check there.
>>
>> Can you ping the router and the other computer? If you can ping using an
>> address, can you ping by name?
>>
>> Do you have NetBIOS over TCP/IP enabled (normally enabled by default)?
>>
>> Do you have file and print sharing enabled?
>>
>> Is there a firewall in the router?
>>
>> >I only have one IP address
>> > which is being used on both the desktop and the laptop<
>>
>> I don't understand this statement. Your laptop and desktop should be
>> using
>> addresses something like 192.168.1.X. Each computer has to have it's own
>> address. The router should be the only thing using your 1 IP address and
>> it
>> should be allocating the other addresses using DHCP.
>>
>> There are many websites dedicated to setting up a LAN, you might search
>> for
>> one of those. Here is one to get your started.
>>
>> http://www.microsoft.com/windowsxp/u...g/default.mspx
>>
>> Clark
>>
>> To test, you might want to turn off all security and maybe unplug from
>> the
>> net until you get your LAN working."David Carlson" <David
>> > wrote in message
>> news:3F7172D8-D0E0-4406-89AE-...
>> > Ok, here's the deal. I have my desktop and my laptop on a home network
>> > with
>> > cable internet connected via a wireless router. They are both using
>> > fully
>> > updated XP Home SP2. They connect fine as far as the laptop being able
>> > to
>> > connect to the internet, but when it comes to sharing
>> > files/printers/etc...
>> > nothing. When I go to My Network Places on my laptop and click on view
>> > workgroup computers I get this message: "Joshs is not accessible. You
>> > might
>> > not have permission to use this network resourse. Contact the
>> > administrator
>> > of this server to find out if you have access permissions. The network
>> > path
>> > was not found." Joshs is the workgroup which both computers are a
>> > member
>> > of,
>> > and both computers have different computer names. This is really
>> > frustrating.
>> > Thanks for your help.
>> >
>> > P.S. I disabled the XP Home SP2 firewall on my laptop because I'm
>> > running
>> > Norton Internet Security on my desktop(host). I only have one IP
>> > address
>> > which is being used on both the desktop and the laptop.
>> >
>>
>>
>>
Similar Threads
