Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Internal Interface

Reply
Thread Tools

Internal Interface

 
 
RG
Guest
Posts: n/a
 
      11-29-2009
I have two internal networks.

ex..
Network a). 192.168.10.0 subnet 255.255.255.0
Network b). 211.14.12.254 subnet 255.255.255.248

Network b) corresponds to public ips. Stratic route was created from
outside to inside and appropiate acls.
Do I need to create acls for these publicly assigned ip machines to
communicate with Network b)? If yes, how would these acls look?

Thanks in advance

 
Reply With Quote
 
 
 
 
jam3s jam3s is offline
Junior Member
Join Date: Nov 2009
Posts: 4
 
      11-29-2009
the 192.168.*.* network is a private range so you need to look at NAT/PAT solution articles.techrepublic.com.com/5100-10878_11-1053789.html

However not entirely sure what your trying to do? are you trying to get the 192.168.10.0 network to access the internet?
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cisco PIX 501 - Port forwarded to an internal host via Static NAT doesn't work from internal host JoelSeph Cisco 9 01-23-2006 03:52 PM
Setting up a router with 29 Global IPs, BUT can't ping router internal interface from server or server interface from router war_wheelan@yahoo.com Cisco 1 12-14-2005 03:31 PM
Internal Client Accessing Internal Server Via Public IP Address GeekMarine1972 Cisco 1 01-15-2005 02:49 AM
Redirect Internal IP to Different Internal IP on Same Subnet & Interface EG Cisco 5 12-30-2004 02:10 AM
internal to internal NAT? Mike Cisco 1 04-21-2004 12:15 PM



Advertisments