Hi everyone, I have a problem with a cisco 878 router (800 series)
I need configure it for share the internet connection from a cable modem into a lan...
I have configured the FE0 port as dhcp server for the LAN and is working good.
I have to configure the router to accept the dinamically ip given by the cable modem and share this connection to the LAN...
How can i do that?
This is my config:
Cisco878#show run
Building configuration...
Current configuration : 1691 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Cisco878
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$rGeU$G/K6KIPznnVBSrohUuZa20
!
no aaa new-model
!
resource policy
!
ip cef
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.10.1 192.168.10.20
!
ip dhcp pool CLIENTE
network 192.168.10.0 255.255.255.0
default-router 192.168.10.1
dns-server 200.54.144.227
lease infinite
!
!
no ip domain lookup
ip domain name papnet.cl
!
!
crypto pki trustpoint TP-self-signed-2027624717
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2027624717
revocation-check none
rsakeypair TP-self-signed-2027624717
!
!
username javier privilege 15 secret 5 $1$B7yq$LtAvEdTWtFG3LueURJE86.
!
!
controller DSL 0
line-term cpe
!
!
!
!
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
!
interface FastEthernet0
!
interface FastEthernet1
switchport access vlan 2
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
ip address 192.168.10.1 255.255.255.0
!
interface Vlan2
ip address dhcp client-id FastEthernet1
ip nat outside
ip virtual-reassembly
no ip route-cache cef
no ip route-cache
no ip mroute-cache
!
router rip
network 192.168.0.0
network 200.0.0.0
!
!
!
no ip http server
ip http authentication local
ip http secure-server
!
!
!
!
!
control-plane
!
!
line con 0
login local
no modem enable
line aux 0
line vty 0 4
privilege level 15
password *****
login
transport input telnet ssh
!
scheduler max-task-time 5000
!
webvpn context Default_context
ssl authenticate verify all
!
no inservice
!
end
|
Similar Threads
