Cisco 6509, SUP2, IPv6, upgrade IOS failed

Hello together,

I have an Cisco 6900 Switch, with an Supervisor Engine 2 (incl MSFC-2 & PFC2). I want to implement IPv6. Till now, there's (c6sup2_rp-JK2SV-M), Version 12.1(26)E2 on it. In an online-tool from cisco, I typed in my hardware and my desired application and the tool said me, that therefor I had to install c6k222-jk9sv-mz.122-18.SXD7b.bin

This image is > 32 MB and has several other needs concerning hardware. Therefore I changed e.g. the RAM. Now I want to boot this new IOS Image, but I can boot neither from tftp nor from a cf-card (built in an cf-pcmcia-adapter).

He didn't recognize the CF-Card ("device does not contain a valid magic number"), even after formating the card under remote Switch-Processor.

The Bootvariable with the tftp-server is compeletely ignored. There's only the tftp server in the Bootvariable, but it boots from bootflash:

I even tried to update the bootstraps (SP Switch Processor 7.1(1) & RP Route processor 12.2(17r)S5). But it still loads out of the bootflash the version 12.1(26)E2

Has anyone of you an idea?
If you need more information, just ask, please.

Thanks in advance


Now I'll post the bootup after configuring the tftp-bootup:

__________________________________________________ ______________
ipv6-6509#show bootvar
BOOT variable = tftp://---.---.---.---/c6k222-jk9sv-mz.122-18.SXD7b.bin,12;tftp://---.---.---.---/c6k222-jk9sv-mz.122-18.SXD7b,12
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
Configuration register is 0x2102

Standby is not up.
ipv6-6509#reload
Proceed with reload? [confirm]

00:10:57: %SYS-5-RELOAD: Reload requested
00:11:00: %OIR-SP-6-CONSOLE: Changing console ownership to switch processor

***
*** --- SHUTDOWN NOW ---
***

00:11:03: %SYS-SP-5-RELOAD: Reload requested
00:11:03: %OIR-SP-6-CONSOLE: Changing console ownership to switch processor



System Bootstrap, Version 7.1(1)
Copyright (c) 1994-2001 by cisco Systems, Inc.
c6k_sup2 processor with 524288 Kbytes of main memory

Autoboot executing command: "boot "

Self decompressing the image : [OK]

[---]

Cisco Internetwork Operating System Software
IOS (tm) c6sup2_sp Software (c6sup2_sp-SPV-M), Version 12.1(26)E2, RELEASE SOFTWARE (fc1)
Technical Support:
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Thu 07-Jul-05 07:09 by ccai
Image text-base: 0x40020F90, data-base: 0x409B2000


00:00:03: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor
00:00:05: %OIR-SP-6-CONSOLE: Changing console ownership to route processor



System Bootstrap, Version 12.2(17r)S5, RELEASE SOFTWARE (fc1)
Technical Support:
Copyright (c) 2005 by cisco Systems, Inc.
Cat6k-MSFC2 platform with 524288 Kbytes of main memory

Download Start
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Download Completed! Booting the image.
Self decompressing the image :

[---]

Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-JK2SV-M), Version 12.1(26)E2, RELEASE SOFTWARE (fc1)
Technical Support:
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Thu 07-Jul-05 06:11 by ccai
Image text-base: 0x40008F90, data-base: 0x41D02000


[---]

cisco WS-C6509 (R7000) processor (revision 3.2) with 458752K/65536K bytes of memory.
Processor board ID SAL09444CPK
R7000 CPU at 300Mhz, Implementation 39, Rev 2.1, 256KB L2, 1024KB L3 Cache
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 Virtual Ethernet/IEEE 802.3 interface(s)
4 Gigabit Ethernet/IEEE 802.3 interface(s)
381K bytes of non-volatile configuration memory.

65536K bytes of Flash internal SIMM (Sector size 512K).


Press RETURN to get started!


00:00:50: %C6K_PLATFORM-4-BADFLASH: Unsupported flash type in the bootflash - Setting to READONLY. Will NOT be able to save crash info to flash of Router on module: 1
00:00:51: RP: Currently running ROMMON from F1 region
00:00:58: %SYS-5-CONFIG_I: Configured from memory by console
00:01:00: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-JK2SV-M), Version 12.1(26)E2, RELEASE SOFTWARE (fc1)
Technical Support:
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Thu 07-Jul-05 06:11 by ccai
00:00:05: %OIR-SP-6-CONSOLE: Changing console ownership to route processor



00:00:54: SP: SP: Currently running ROMMON from F1 region
00:01:00: %SNMP-5-COLDSTART: SNMP agent on host ipv6-6509 is undergoing a cold start
00:01:00: %SYS-6-BOOTTIME: Time taken to reboot after reload = 110 seconds
00:00:59: %SYS-SP-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_sp Software (c6sup2_sp-SPV-M), Version 12.1(26)E2, RELEASE SOFTWARE (fc1)
Technical Support:
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Thu 07-Jul-05 07:09 by ccai
00:01:00: %SW_VLAN-SP-4-VTP_INTERNAL_ERROR: VLAN manager received an internal error 14 from vtp function vtp_download_info: Bad parent VLAN ID
-Traceback= 4067FE38 4067BC94 400FCD64 400FCD50
00:01:01: %C6KENV-SP-4-FANVERCHK: Power-supply 1 inserted is only compatible with Version 1 fan-tray. Please make sure fan is low-output fan-tray
00:01:01: %OIR-SP-6-INSPS: Power supply inserted in slot 1
00:01:01: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
00:01:01: %C6KENV-SP-4-FANVERCHK: Power-supply 2 inserted is only compatible with Version 1 fan-tray. Please make sure fan is low-output fan-tray
00:01:01: %OIR-SP-6-INSPS: Power supply inserted in slot 2
00:01:01: %C6KPWR-SP-4-PSOK: power supply 2 turned on.
00:01:01: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy mode, system is operating on both power supplies.
00:01:15: %DIAG-SP-6-RUN_MINIMUM: Module 1: Running Minimum Online Diagnostics...
00:01:25: %DIAG-SP-6-DIAG_OK: Module 1: Passed Online Diagnostics
00:01:25: %OIR-SP-6-INSCARD: Card inserted in slot 1, interfaces are now online

fabianV