ipsec vpn pix506 cant see internal network

hi everyone
same as title.im able to establish vpn connection, but dont see internal network

PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 9oxbv7Ut.gwTPTmC encrypted
passwd 9oxbv7Ut.gwTPTmC encrypted
hostname pix506
domain-name squareball.info
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list inbound permit icmp any any
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside dhcp setroute
ip address inside 192.168.3.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool test 192.168.3.50-192.168.3.60
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 192.168.3.0 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto dynamic-map dynmap 30 set transform-set myset
crypto map newmap 65000 ipsec-isakmp dynamic dynmap
crypto map mymap 30 ipsec-isakmp dynamic dynmap
crypto map mymap interface outside
isakmp enable outside
isakmp identity address
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
vpngroup vpn3000 address-pool test
vpngroup vpn3000 dns-server 194.168.4.100 194.168.8.100
vpngroup vpn3000 idle-time 1800
vpngroup vpn3000 password ********
telnet 192.168.3.0 255.255.255.0 inside
telnet timeout 20
ssh timeout 5
console timeout 0
dhcpd address 192.168.3.20-192.168.3.30 inside
dhcpd dns 194.168.4.100 194.168.8.100
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd enable inside
terminal width 80
Cryptochecksum:080b0596eb19f0ca5aaa7174d1ce34a7
: end
[OK]

i know this is somethings to do with ipsec through NAT
so i tried with extra config:

access-list nonat permit ip 192.168.3.0 255.255.255.0 192.168.3.0 255.255.255.0
nat (inside) 0 access-list nonat

if i good understanding nat 0 is no nat for incomming network 192.168.3.0 which going to 192.168.3.0

inforjunetly is not working
topology: dchp modem <--> pix 506 <--> internal network
any help

lokojones

[adeelasher]

Try
isakmp nat-traversal

adeelasher