Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > General Computer Discussion > Hardware > QOS on a particular scenario

Reply
Thread Tools

QOS on a particular scenario

 
 
laf laf is offline
Junior Member
Join Date: Jun 2009
Posts: 4
 
      06-23-2009
Hello,

I need to implement an QOS policy for the attached scenario.
Couple things to be mentioned:

All the connection to the router goes to a single Gigabit port; there s a trunk with the 3750 neighbor and on that port goes all the traffic in both directions.

interface GigabitEthernet3/1
description Management_class
ip address 10.0.0.1 255.255.255.0
no ip unreachables
no ip proxy-arp
ip accounting output-packets
!
!
interface GigabitEthernet3/1.101
description Our_company
encapsulation dot1Q 101
ip address BGP_subclass_A.1 255.255.255.0
!
interface GigabitEthernet3/1.102
description Clients_Internet
encapsulation dot1Q 102
ip address BGP_subclass_B.1 255.255.255.0

interface GigabitEthernet3/1.219
description ISP_1
encapsulation dot1Q 219
ip address ISP_1_IP 255.255.255.224
no ip redirects
!
interface GigabitEthernet3/1.401
description ISP_2
encapsulation dot1Q 401
ip address ISP_2_IP 255.255.255.252
no ip redirects
!

My goal is to prioritize the Internet for RED selected server, which is actually a Linux GW.

Please throw me some hints of how I could do this ? I was thinking to create an ACL to select the traffic which originates from my Linux GW and then use the class_traffic_ACL on a policy map to and apply a priority of 30;

My question is: where to apply the policy map? On the interface or on the sub_interface? Will it really work?

Or is it better to start marking the traffic of interest instead of using an ACL?
Attached Images
File Type: jpg QOS_scenario.JPG (36.0 KB, 3 views)
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
[QOS] minimal hardware and IOS requirement for QOS dominix Cisco 2 02-06-2007 10:19 AM
QoS to limit bandwith to a particular app? trbodsl@gmail.com Cisco 3 03-01-2006 10:09 AM
QOS for VOIP using 768k of FR / Auto QOS Andrew Albert Cisco 7 02-09-2005 07:42 PM
Re: How to use PIX with NAT in a DMZ Scenario Trond Hindenes Cisco 0 07-22-2003 08:55 AM
Re: Scenario Michael Voight Cisco 3 07-20-2003 12:19 PM



Advertisments