Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > PIX 6.3 - Outbound traffic not working - Inbound works fine

Reply
Thread Tools

PIX 6.3 - Outbound traffic not working - Inbound works fine

 
 
khurri khurri is offline
Junior Member
Join Date: Jun 2009
Posts: 2
 
      06-19-2009
Hi,
I have a vpn and following PIX configuration. Outside users can get in but users can not get out from inside. Outbound traffic is not working at all. Not sure if I have to apply the accesslist to outside interface. Can someone please help?

PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password yEejltES02QYOkGq encrypted
passwd SkGAlm91goMQFQlP encrypted
hostname CUL-FW1
domain-name cul.org
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol pptp 1723
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list 101 permit ip 192.168.0.0 255.255.255.0 192.168.10.0 255.255.255.240
access-list outside_access_in permit icmp any any
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 124.132.244.35 255.255.255.240
ip address inside 192.168.0.3 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool CULVPN 192.168.10.1-192.168.10.15
pdm location 192.168.0.0 255.255.255.0 inside
pdm logging emergencies 100
pdm history enable
arp timeout 14400
global (outside) 1 124.132.244.36-124.132.244.45
global (outside) 1 124.132.244.46
nat (inside) 1 192.168.0.0 255.255.255.0 0 0
access-group outside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 124.132.244.33 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt connection permit-pptp
crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto dynamic-map dynmap 10 set transform-set myset
crypto map mymap 10 ipsec-isakmp dynamic dynmap
crypto map mymap client configuration address initiate
crypto map mymap client configuration address respond
crypto map mymap interface outside
isakmp enable outside
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
vpngroup vpn3000-all idle-time 1800
vpngroup CUlgroup address-pool CULVPN
vpngroup CUlgroup dns-server 192.168.0.5
vpngroup CUlgroup wins-server 192.168.0.5
vpngroup CUlgroup idle-time 1800
vpngroup CUlgroup password ********
telnet 192.168.0.0 255.255.255.0 inside
telnet timeout 5
ssh 192.168.0.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
terminal width 80
Cryptochecksum:c1be5832b851a0ae7a4178e24ea7f999
: end
CUL-FW1#




CUL-FW1# sh int
interface ethernet0 "outside" is up, line protocol is up
Hardware is i82559 ethernet, address is 001d.a286.7ee7
IP address 124.132.244.35, subnet mask 255.255.255.240
MTU 1500 bytes, BW 100000 Kbit full duplex
141411 packets input, 14301433 bytes, 0 no buffer
Received 5560 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
6844 packets output, 425853 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
input queue (curr/max blocks): hardware (128/12 software (0/2)
output queue (curr/max blocks): hardware (0/1) software (0/1)
interface ethernet1 "inside" is up, line protocol is up
Hardware is i82559 ethernet, address is 001d.a286.7ee8
IP address 192.168.0.3, subnet mask 255.255.255.0
MTU 1500 bytes, BW 100000 Kbit full duplex
24912018 packets input, 2155822238 bytes, 0 no buffer
Received 16418328 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
7261021 packets output, 450417946 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
input queue (curr/max blocks): hardware (128/12 software (0/120)
output queue (curr/max blocks): hardware (0/120) software (0/1)
CUL-FW1#

Thanks,
K
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
PIX 6.3 - Outbound traffic not working khurri Hardware 1 06-26-2009 01:39 PM
PIX 525 inbound outbound acl mix gfrankliu@gmail.com Cisco 1 05-11-2009 02:49 PM
x64 fast outbound - slow inbound net traffic Computerflyer Windows 64bit 2 12-27-2006 11:58 PM
PIX 515 Inbound/Outbound access list confusion vincehgov@gmail.com Cisco 2 03-08-2006 09:20 AM
Problems Passing Traffic outside the PIX...incoming works fine Eric Elliston Cisco 4 12-23-2004 05:46 AM



Advertisments