Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Destination Address Translation with IOS NAT and IPSec (Help Please!) :)

Reply
Thread Tools

Destination Address Translation with IOS NAT and IPSec (Help Please!) :)

 
 
Xunzi Xunzi is offline
Junior Member
Join Date: Apr 2009
Posts: 2
 
      04-10-2009
Hi,

Im trying to capture all traffic with destination address X and change that destination address to Y.

Below is an example that demonstates the scenaro better

Traffic comes from any internal host on the 192.168.10.0 network with a destination address of 172.16.10.1 i want the router to translate the destination address to 192.168.20.1. The other problem is the 192.168.20.0 network is the other end of an IPSec tunnel which originates on the same router as this nat rule. Which interface would be my outside, would it be the same one as my crypto map is applied too?

Thanks in advance

Adam
 

Last edited by Xunzi; 04-10-2009 at 09:41 PM.. Reason: Updated the title!
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
ios : Source and destination nat on a single interface Laurent Cisco 2 06-24-2011 06:06 AM
NAT based on destination address in PIX shinhyuk Cisco 5 05-22-2009 08:28 AM
IOS and destination NAT Klaus Zerwes Cisco 2 09-20-2006 01:03 PM
Cisco 3600 NAT by destination address Chris Davis Cisco 1 07-03-2005 06:37 PM
Destination not reachable until destination pings source! PIX501 Dave Cisco 0 02-27-2004 06:15 PM



Advertisments