Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computer Certification > MCSA > VPN

Reply
 
 
Alex
Guest
Posts: n/a
 
      07-21-2004
Hi all,

I am using W2k3 and configure the VPN remote access for the users. There are
2 netowrk card in my server 1st IP address is 192.168.1.201 and the 2nd is
192.168.0.1. however, when I try to connect from home,it shows error: 721
"cannot contact host computer" I have 4 IP and I've try telnet to the 4 of
real ip with 210.55.X.X 1723, but it shows " counld not open connection to
the host" Do i need make some change on the router? The router is maintain
byISP? if yes, what should i ask them to do ? thanks

Alex


 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
VPN site to site & Remote access VPN ( vpn client) over the same interface pasatealinux Cisco 1 12-17-2007 07:41 PM
Cisco vpn server enabled / VPN and no-VPN connections mix Elise Cisco 6 05-22-2004 07:55 AM
Easy VPN Server and Cisco VPN Client 4.0.3 Masud Reza Cisco 2 10-20-2003 06:12 PM
VPN IPSEC connection between a cisco 17xx and Nortel vpn box Joris Deschacht Cisco 0 10-16-2003 02:13 PM
VPN over VPN? Otto Cisco 1 07-18-2003 06:17 PM



Advertisments