«

I am currently working on RIS (For 70-270) and know that the RIS Images have
to be placed on a partition other than the system partition. I am using
Windows Server 2003. When I setup my 2003 Server, I didn't create 2
partitions. Are there any utilities out there that are compatible with
Windows 2003 that will complete a non-destructive re-partition? I would
rather not re-install the server. If there isn't, I can always chuck
another HDD in the PC.

Thanks

If you have the money, check this link out
http://www.powerquest.com/partitionmagicpro/

"Scott McKillop" <_REMOVE_CAPS> wrote in
message news:O$...
> I am currently working on RIS (For 70-270) and know that the RIS Images
have
> to be placed on a partition other than the system partition. I am using
> Windows Server 2003. When I setup my 2003 Server, I didn't create 2
> partitions. Are there any utilities out there that are compatible with
> Windows 2003 that will complete a non-destructive re-partition? I would
> rather not re-install the server. If there isn't, I can always chuck
> another HDD in the PC.
>
> Thanks
>
>

Thanks... I had looked at that before but I don't think it will work with
Windows Server 2003

PartitionMagic Pro 7.0 supports all major operating system platforms
including:
Windows XP
Windows 95/98
Windows Me
Windows 2000 Professional
NT 4.0 workstation
DOS



"Matt" <> wrote in message
news:...
> If you have the money, check this link out
> http://www.powerquest.com/partitionmagicpro/
>
> "Scott McKillop" <_REMOVE_CAPS> wrote in
> message news:O$...
> > I am currently working on RIS (For 70-270) and know that the RIS Images
> have
> > to be placed on a partition other than the system partition. I am using
> > Windows Server 2003. When I setup my 2003 Server, I didn't create 2
> > partitions. Are there any utilities out there that are compatible with
> > Windows 2003 that will complete a non-destructive re-partition? I would
> > rather not re-install the server. If there isn't, I can always chuck
> > another HDD in the PC.
> >
> > Thanks
> >
> >
>
>

Partition Magic works fine, I've used it with 2003 several times. You can
also use some linux (free) utils if you know how.. There's a linux distro
called Knoppix that runs completely off of a CD rom too...


"Scott McKillop" <_REMOVE_CAPS> wrote in
message news:...
> Thanks... I had looked at that before but I don't think it will work with
> Windows Server 2003
>
> PartitionMagic Pro 7.0 supports all major operating system platforms
> including:
> Windows XP
> Windows 95/98
> Windows Me
> Windows 2000 Professional
> NT 4.0 workstation
> DOS
>
>
>
> "Matt" <> wrote in message
> news:...
> > If you have the money, check this link out
> > http://www.powerquest.com/partitionmagicpro/
> >
> > "Scott McKillop" <_REMOVE_CAPS> wrote
in
> > message news:O$...
> > > I am currently working on RIS (For 70-270) and know that the RIS
Images
> > have
> > > to be placed on a partition other than the system partition. I am
using
> > > Windows Server 2003. When I setup my 2003 Server, I didn't create 2
> > > partitions. Are there any utilities out there that are compatible
with
> > > Windows 2003 that will complete a non-destructive re-partition? I
would
> > > rather not re-install the server. If there isn't, I can always chuck
> > > another HDD in the PC.
> > >
> > > Thanks
> > >
> > >
> >
> >
>
>
>

Thanks Matt & James... I'll look into purchasing a copy.

Scott


"James Martin" <martin 426 At yahoo> wrote in message
news:%...
> Partition Magic works fine, I've used it with 2003 several times. You can
> also use some linux (free) utils if you know how.. There's a linux distro
> called Knoppix that runs completely off of a CD rom too...
>
>
> "Scott McKillop" <_REMOVE_CAPS> wrote in
> message news:...
> > Thanks... I had looked at that before but I don't think it will work
with
> > Windows Server 2003
> >
> > PartitionMagic Pro 7.0 supports all major operating system
platforms
> > including:
> > Windows XP
> > Windows 95/98
> > Windows Me
> > Windows 2000 Professional
> > NT 4.0 workstation
> > DOS
> >
> >
> >
> > "Matt" <> wrote in message
> > news:...
> > > If you have the money, check this link out
> > > http://www.powerquest.com/partitionmagicpro/
> > >
> > > "Scott McKillop" <_REMOVE_CAPS>
wrote
> in
> > > message news:O$...
> > > > I am currently working on RIS (For 70-270) and know that the RIS
> Images
> > > have
> > > > to be placed on a partition other than the system partition. I am
> using
> > > > Windows Server 2003. When I setup my 2003 Server, I didn't create
2
> > > > partitions. Are there any utilities out there that are compatible
> with
> > > > Windows 2003 that will complete a non-destructive re-partition? I
> would
> > > > rather not re-install the server. If there isn't, I can always
chuck
> > > > another HDD in the PC.
> > > >
> > > > Thanks
> > > >
> > > >
> > >
> > >
> >
> >
> >
>
>

>-----Original Message-----
>I am currently working on RIS (For 70-270) and know that
the RIS Images have
>to be placed on a partition other than the system
partition. I am using
>Windows Server 2003. When I setup my 2003 Server, I
didn't create 2
>partitions. Are there any utilities out there that are
compatible with
>Windows 2003 that will complete a non-destructive re-
partition? I would
>rather not re-install the server. If there isn't, I can
always chuck
>another HDD in the PC.
>
>Thanks
>
>
why you use simply disk management to create another
partion in your pc , if not the third party partion tools
avalable go to cnet.com and type partition tools and
display may help you . if you do not stasfy the asnwer
then my mail me , i give u more
tops for RIS troubleshooting ok bye .
>.
>

Thanks... I did get this working. My problem was that I didn't have any
free space on my disk that wasn't partitioned. When I originally setup the
server I only created a single partition (C:\) From my understanding, you
cannot configured RIS to install images off of the System partition. For
this reason, I was trying to do a non-destructive partition on the single
partition to create 2 separate partitions (if that makes any sense at all).

I took the easy way out and installed a second hard drive and configured it
to hold my RIS images.


"mak" <> wrote in message
news:d4fe01c3efca$2c603280$...
>
> >-----Original Message-----
> >I am currently working on RIS (For 70-270) and know that
> the RIS Images have
> >to be placed on a partition other than the system
> partition. I am using
> >Windows Server 2003. When I setup my 2003 Server, I
> didn't create 2
> >partitions. Are there any utilities out there that are
> compatible with
> >Windows 2003 that will complete a non-destructive re-
> partition? I would
> >rather not re-install the server. If there isn't, I can
> always chuck
> >another HDD in the PC.
> >
> >Thanks
> >
> >
> why you use simply disk management to create another
> partion in your pc , if not the third party partion tools
> avalable go to cnet.com and type partition tools and
> display may help you . if you do not stasfy the asnwer
> then my mail me , i give u more
> tops for RIS troubleshooting ok bye .
> >.
> >