Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > General Computer Discussion > Hardware > Cisco 2600 - Inbound NAT translation/Port-forwarding not working

Reply
Thread Tools

Cisco 2600 - Inbound NAT translation/Port-forwarding not working

 
 
Greg Greg is offline
Junior Member
Join Date: Nov 2008
Posts: 1
 
      11-20-2008
I am having a problem with my inbound NAT translation/Port-forwarding. I am using NAT port-forwarding to allow traffic from the Internet to reach 18 servers. The problem is that this is working for a few of the servers and not for the rest, even though the configuration is identical for all of them. I have searched hi & low trying to find a solution and/or suggestions on how to troubleshoot this problem. I have read the cisco docs but have not found a usable answer in them either. Any assistance/suggestions would be greatly appreciated. I have include a copy of the NAT stats for you to look at. Thanks, Greg
xxx_distribution_1#sh ip nat stat
Total active translations: 1504 (0 static, 1504 dynamic; 1504 extended)
Outside interfaces:
FastEthernet0/0
Inside interfaces:
FastEthernet0/1, FastEthernet0/1.5, FastEthernet0/1.10, FastEthernet0/1.15
FastEthernet0/1.20, FastEthernet0/1.25, FastEthernet0/1.30
FastEthernet0/1.35, FastEthernet0/1.40
Hits: 4130866 Misses: 93029
CEF Translated packets: 4158864, CEF Punted packets: 110268
Expired translations: 109237
Dynamic mappings:
– Inside Source
[Id: 1] access-list 10 interface FastEthernet0/0 refcount 1469
– Inside Destination
[Id: 2] access-list 101 pool xxx_webserver refcount 22
pool xxx_webserver: netmask 255.255.255.252
start 192.168.5.130 end 192.168.5.130
type rotary, total addresses 1, allocated 22 (2200%), misses 0
[Id: 3] access-list 102 pool xxx_SAP refcount 13
pool xxx_SAP: netmask 255.255.255.252
start 192.168.5.2 end 192.168.5.2
type rotary, total addresses 1, allocated 13 (1300%), misses 0
[Id: 4] access-list 103 pool xxx_sapbw refcount 0
pool xxx_sapbw: netmask 255.255.255.252
start 192.168.5.172 end 192.168.5.172
type rotary, total addresses 1, allocated 0 (0%), misses 3
[Id: 5] access-list 104 pool xxx_BI refcount 0
pool xxx_BI: netmask 255.255.255.252
start 192.168.5.82 end 192.168.5.82
type rotary, total addresses 1, allocated 0 (0%), misses 0
[Id: 6] access-list 106 pool xxx_Surveillance refcount 0
pool xxx_Surveillance: netmask 255.255.255.252
start 192.168.5.45 end 192.168.5.45
type rotary, total addresses 1, allocated 0 (0%), misses 0
[Id: 7] access-list 107 pool xxx_Prometric refcount 0
pool xxx_Prometric: netmask 255.255.255.252
start 192.168.5.3 end 192.168.5.3
type rotary, total addresses 1, allocated 0 (0%), misses 0
[Id: 8] access-list 108 pool xxx_CM/VUE refcount 0
pool xxx_CM/VUE: netmask 255.255.255.252
start 192.168.0.7 end 192.168.0.7
type rotary, total addresses 1, allocated 0 (0%), misses 6
[Id: 9] access-list 109 pool xxx_BI7_1 refcount 0
pool xxx_BI7_1: netmask 255.255.255.252
start 192.168.5.8 end 192.168.5.8
type rotary, total addresses 1, allocated 0 (0%), misses 0
[Id: 10] access-list 110 pool xxx_edu4u refcount 0
pool xxx_edu4u: netmask 255.255.255.252
start 192.168.5.16 end 192.168.5.16
type rotary, total addresses 1, allocated 0 (0%), misses 4524
[Id: 11] access-list 111 pool xxx_QC refcount 0
pool xxx_QC: netmask 255.255.255.252
start 192.168.5.18 end 192.168.5.18
type rotary, total addresses 1, allocated 0 (0%), misses 0
[Id: 12] access-list 112 pool xxx_EMULE refcount 0
pool xxx_EMULE: netmask 255.255.255.252
start 192.168.5.20 end 192.168.5.20
type rotary, total addresses 1, allocated 0 (0%), misses 0
[Id: 13] access-list 114 pool xxx_BI7_2 refcount 0
pool xxx_BI7_2: netmask 255.255.255.252
start 192.168.5.80 end 192.168.5.80
type rotary, total addresses 1, allocated 0 (0%), misses 0
[Id: 14] access-list 115 pool xxx_RDP refcount 0
pool xxx_RDP: netmask 255.255.255.252
start 192.168.5.11 end 192.168.5.11
type rotary, total addresses 1, allocated 0 (0%), misses 30
[Id: 15] access-list 116 pool xxx_CONTACT/CVS refcount 0
pool xxx_CONTACT/CVS: netmask 255.255.255.252
start 192.168.5.111 end 192.168.5.111
type rotary, total addresses 1, allocated 0 (0%), misses 177
[Id: 16] access-list 117 pool xxx_swtest refcount 0
pool xxx_swtest: netmask 255.255.255.252
start 192.168.5.125 end 192.168.5.125
type rotary, total addresses 1, allocated 0 (0%), misses 0
[Id: 17] access-list 118 pool xxx_cvs refcount 0
pool xxx_cvs: netmask 255.255.255.252
start 192.168.5.156 end 192.168.5.156
type rotary, total addresses 1, allocated 0 (0%), misses 0
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cisco 2600 Router and NAT rudiadams Hardware 1 06-10-2012 10:52 PM
Cisco inbound NAT Question Devin Shirkey Cisco 3 08-07-2010 06:08 AM
PWR-2600-AC 2600 power supply to switch over a DC router? dehusk@gmail.com Cisco 2 08-09-2008 10:47 PM
Cisco 2600 ADSL with failover to Ethernet with NAT Jack Cisco 3 05-29-2008 07:35 AM
Help for NAT on a Cisco 2600 O-Zone Cisco 1 11-22-2004 03:40 AM



Advertisments
 



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57