Hello there;
I have a catalyst 4006 switch with administrator and layer3 switching module. I have couple of vlans configured and running fine. I also have two firewalls for internet access, one of them is a PIX 515 and the other is a MS ISA 2004 server.
Here i will describe my configuration
Vlan 10---->192.168.10.0/24
Vlan 100--->192.168.100.0/24
Vlan 200---->192.18.200.0/24
PIX--->192.168.1.1
ISA--->192.168.100.1
How can i force everyone on vlan 10 to go through the PIX firewall for internet access, meanwhile every one on vlans 100 and 200 through the ISA server.
I know that i need to use route-map command, but how? A small example would be much appreciated.
|
Similar Threads
