Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > General Computer Discussion > Hardware > Cisco pix 501 config

Reply
Thread Tools

Cisco pix 501 config

 
 
ciscokid ciscokid is offline
Junior Member
Join Date: Sep 2008
Posts: 1
 
      09-12-2008
new to the forum, not so new to the genre...

In any case, I am trying to configure a Cisco Pix 501 to route authenticated VPN user internet traffic via an internal gateway, vs or in conjunction with the split tunneling method in which the authenticated VPN user will have his own external IP address.

for example:

user1 --> Public ip 10.10.10.1
Authenticates to VPN gets internal IP address 192.168.1.25 from external interface 5.5.5.1

i have another gateway server on the internal network that has external IP of 5.5.5.2

when browsing the internet, I want the user to browse from 5.5.5.2 (or 5.5.5.1, but I know there is some u-turn issue with the Ppix that won't allow this)

Any help on this would be much appreciated. I have been arguing with several senior sysadmins about the "u-turn" issue, which I don't feel is relevant, since we could still use 5.5.5.2.

Thank you in advance.

ck
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
I need some help verifying and cleaning up my Cisco PIX 501 Config xvpnx Cisco 0 01-25-2009 01:28 PM
Cisco pix 501 vs 501-50 cdoc Cisco 6 05-20-2006 03:53 AM
PIX 501 <-> PIX 501 - Problem contating private networks on the inside Andre Cisco 7 02-20-2005 07:02 PM
Cisco PIX 501 NAT config issue Binner Cisco 3 10-07-2004 11:31 AM
Cisco PIX 501 Config Question Mike Morgan Cisco 6 04-23-2004 03:00 PM



Advertisments