Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > WS-C2950T-24 catalyst vlan problem

Thread Tools

WS-C2950T-24 catalyst vlan problem

netguy2000 netguy2000 is offline
Junior Member
Join Date: Aug 2007
Posts: 2
Hi all Gurus,
please help me to solve this issue.
I have a Catalyst WS-C2950T-24 switch (24 10/100 ports + 2 Giga Ports)

I want to configure port 2 as a trunk and port 3 to 9 as a access ports with VLAN 10.
I use these commands to do above.

#conf term
#vlan 10
#name LocalVlan10

#inter fast 0/2
#switchport mode trunk
#switchport trunk allowed vlan 1
#switchport trunk allowed vlan add 10

#inter fast 0/3
#switchport mode access
#switchport access vlan 10

now the problem is: My pc attached with port 0/3 of catalyst and trunk port 0/2 is connected with my network. my PC is unable to access network of trunk port.

I dont know what to do now, Please help me.

Reply With Quote
fatman fatman is offline
Junior Member
Join Date: Aug 2008
Posts: 2
What is on the otherside of that trunk?

Is this a router on a stick? I don't think the 2950 will route between different subnets/vlans otherwise.
Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
anyone know about: vlan trunking with catalyst 1900 to any other iosdevice (catalyst 2950) Neddy Cisco 8 05-27-2009 04:37 PM
Catalyst 3200/LS1010 Vlan trunking problem Hkz Cisco 1 12-25-2007 10:08 AM
VLAN trunking across Catalyst 2900 XL and Catalyst 1900. Jarek Jarzebowski Cisco 1 06-18-2005 08:57 PM
catalyst 2950 vlan problem Rick Cisco 5 11-28-2003 01:04 PM
Again a catalyst vlan problem Michael Kiessling Cisco 2 07-21-2003 08:25 AM