nibz version 15 NEW! DMA Bus

Hi

Still a low LE count, added a DMA bus which you could connect to
another WISHBONE master, or strap on some other logic. I am thinking
of a possible interrupt vector passing protocol for the next update.

Fmax with area and nothing fancy is about 28MHz in C5 MAX II.

cheers
jacko.

jacko

Also get the FREE DAC2 source. A neat little digital to analog
converter using phase ultrasonics, for output on a single digital pin
for feeding into a LPF. This is the b***ocks!

cheers
jacko

jacko

"jacko" <> wrote in message
news:bef61521-51a7-4ad3-8f39-...
> Also get the FREE DAC2 source. A neat little digital to analog
> converter using phase ultrasonics, for output on a single digital pin
> for feeding into a LPF. This is the b***ocks!
>
> cheers
> jacko

'C' compiler?

Thanks, Syms.

p.s. A fair few folks on this newsgroups are 'merican. They might think
b***ocks are buttocks, rather than *******s. In any case, the *******s need
to belong to a dog to be any good. Unless I'm talking *******s.

Symon

On 17 Aug, 23:31, "Symon" <symon_bre...@hotmail.com> wrote:
> "jacko" <jackokr...@gmail.com> wrote in message
>
> news:bef61521-51a7-4ad3-8f39-...
>
> > Also get the FREE DAC2 source. A neat little digital to analog
> > converter using phase ultrasonics, for output on a single digital pin
> > for feeding into a LPF. This is the b***ocks!
>
> > cheers
> > jacko
>
> 'C' compiler?
>
> Thanks, Syms.
>
> p.s. A fair few folks on this newsgroups are 'merican. They might think
> b***ocks are buttocks, rather than *******s. In any case, the *******s need
> to belong to a dog to be any good. Unless I'm talking *******s.

No toolchain at present. For a C compilier I would require a compilier
which was free, and had all operations defined as subroutine
addresses. The subroutine set for the compilier could then be written,
any ideas?

cheers
jacko

The dac2.vhd does not work, dac.vhd will. Use greater than 4 times
oversampling. i.e. 66MHz >1024 times oversampling of CD quality audio,
set LPF on pin at about 1MHz.

jacko

http://en.wikipedia.org/wiki/Retargetable_compiler

Symon

On 18 Aug, 17:26, "Symon" <symon_bre...@hotmail.com> wrote:
> http://en.wikipedia.org/wiki/Retargetable_compiler

Well spent 2 hours looking, downloading a few pdfs, looks like there
is no easy solution. looks like a MIDP2 applet for a phone, with a
simulated virtual machine, and then build on a forth compilier,..

I'm aiming for light weight systems, not the full llvm and the sink
too.

cheers
jacko

jacko