![]() |
|
|
|
#1 |
|
A person named TD responded to a post that:
"The best system I have found is First a NAT router with a DMZ set to a fictitious IP address" How would I go about doing this? I have a Linsys wireless router conected to a cable modem, 2 wired desktops and 2 wireless laptops in a peer to peer configuration. I would like to make the firewall and DMZ as secure as possible so I can share resources amongst the peers with relative security. =?Utf-8?B?dGxvdw==?= |
|
|
|
|
#2 |
|
Posts: n/a
|
Hi
Bear in mind that though the same word Security is used to describe Secure Internet Connection and Secure Wireless, from a Computer functioning perspective there is No relation between the two. Wireless Security has Nothing to do with securing the Internet Connection. Wireless is just a replacement for a Wire and thus can be intercepted by people in the neighborhood attaching them self to your Signal and use your LAN and your LAN's Internet Connection. To avoid Local Tapping there are Wireless Security measures. These measures are unique to the Wireless components, and have to be used even if there is No Internet Connection. These short pages describe the basic principles of functional Wireless Security. Wireless Security - http://www.ezlan.net/Wireless_Security.html WEP, WPA, and the Future - http://www.ezlan.net/wpa_wep.html Network Segregation - http://www.ezlan.net/shield.html Cable/DSL Router Hardware NAT and Firewall/AntiVirus/AntiSpy applications are the ones that protect the Internet connection from being invaded/infested, and preventing your LAN computers (Wired and Wireless) from transmitting out to the Internet privileged information. All the computers (as a Network) would have basic Internet protection by using a Cable/DSL Router. In addition, each computer on your Network that has access to the Internet should have its own Internet Connection protection regardless of whether it uses Wire or Wireless. Internet -Basic protection: http://www.ezlan.net/firewall.html Assemble Freeware Security suit for Internet Connection: http://www.ezlan.net/security.html In addition you should have tools available to clean your computers if they get Infested with Internet "Junk". Internet Infestation: http://www.ezlan.net/infestation.html Basic Steps in cleaning Internet "Junk" - http://www.ezlan.net/clean.html Jack (MVP-Networking). "tlow" <> wrote in message news:256DF39A-BDC0-4769-AEBE-... > A person named TD responded to a post that: > > "The best system I have found is First a NAT router with a DMZ set to a > fictitious IP address" > > How would I go about doing this? > > I have a Linsys wireless router conected to a cable modem, 2 wired desktops > and 2 wireless laptops in a peer to peer configuration. I would like to make > the firewall and DMZ as secure as possible so I can share resources amongst > the peers with relative security. Jack \(MVP\) |
|
![]() |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Belking 54G keeps losing wireless connection. | Jello87 | Hardware | 0 | 10-13-2008 02:06 PM |
| Notebook + dial up modem + wireless router = wireless network ? | fujikoma_2008 | Hardware | 1 | 02-21-2008 04:02 PM |
| Setting up a Network -- Wired or Wireless? | shopzero.net | DVD Video | 1 | 07-24-2006 07:18 PM |
| Re: adding wireless to a wired network | AG | A+ Certification | 3 | 01-14-2005 08:52 AM |
| Re: adding wireless to a wired network | Remo | A+ Certification | 0 | 01-07-2005 06:31 PM |