Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > General Computer Discussion > General Computer Support > DS3 Trouble question

Thread Tools

DS3 Trouble question

rhalliday rhalliday is offline
Junior Member
Join Date: Jun 2008
Posts: 2
Ok I have A DS3 Trouble question. Ok the other day I had an DS3 that stated it was In-service/RAI “Remote Alarm Indication”. Now this is MUXED out on both ends of the circuit. Slots 1-26 showed In-service and Slots 27-28 were out of service “DOWN”. Also on the DS0 trunk level Slot 1 “TCIC 1-24” “Members 1-24” & Slot 14 “TCIC 325-348” “Members 313-336” were in-service and taking calls, not sure about the Qos service though. The TCIC’s Members Slots 2-13 & 15-26 were all out of service blocked, and of course TCIC’s in slots 27-28 were out of service due to these Slots were out of service “DOWN”

Now there problem was that the carrier found and bad BNC connecter on there Receive and my Transmit. They replaced it and all came back up and in serves “Problem cleared”

My question My Theory is:
Is the reason this “STATE” happened due to because all the bandwidth is not there do to this problem and the DS3 decreases it’s bandwidth to try and stay up?
Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
DS3 Bandwidth Question? rhalliday General Computer Support 0 06-28-2008 10:10 PM
Point to Point Clear Channel DS3 - Clock Source Question Evolution Cisco 1 07-19-2006 11:33 PM
DS3 Bandwidth router question TeamGracie Cisco 2 03-02-2004 09:44 PM
T1 drops because of DS3 trouble? admin too Cisco 3 02-29-2004 03:05 AM
Suggestions for DS3 router options Adrian Jensen Cisco 3 07-11-2003 05:19 AM