«

[waqas001]

I have a PIX 501 Installed, i have made the VPN wizard of type Remote access VPN, but when the wizard completes it gives me error like

[OK] no vpdn group PPTP-VPDN-GROUP
[OK] vpdn group PPTP-VPDN-GROUP accept dialin pptp
[OK] no vpdn group PPTP-VPDN-GROUP ppp authentication pap
[OK] no vpdn group PPTP-VPDN-GROUP ppp authentication chap
[OK] no vpdn group PPTP-VPDN-GROUP ppp authentication mschap
[OK] vpdn group PPTP-VPDN-GROUP client configuration address local test
[OK] vpdn group PPTP-VPDN-GROUP client configuration dns 192.168.1.10
[OK] vpdn group PPTP-VPDN-GROUP client configuration wins 192.168.1.10
[ERR]vpdn enable outside Can not enable vpdn on the same interface as PPPoE.
[ERR]access-list inside_outbound_nat0_acl line 2 permit ip any 192.168.1.96 255.255.255.240
ACE not added. Possible duplicate entry
[OK] nat (inside) 0 access-list inside_outbound_nat0_acl
[OK] sysopt connection permit-pptp

OK] no vpdn group PPTP-VPDN-GROUP
[OK] vpdn group PPTP-VPDN-GROUP accept dialin pptp
[OK] vpdn group PPTP-VPDN-GROUP ppp authentication pap
[OK] no vpdn group PPTP-VPDN-GROUP ppp authentication chap
[OK] no vpdn group PPTP-VPDN-GROUP ppp authentication mschap
[OK] vpdn group PPTP-VPDN-GROUP client authentication local
[OK] vpdn group PPTP-VPDN-GROUP client configuration address local test
[ERR]vpdn enable outside
Can not enable vpdn on the same interface as PPPoE.
[ERR]access-list inside_outbound_nat0_acl line 2 permit ip any 192.168.1.96 255.255.255.240
ACE not added. Possible duplicate entry
[OK] nat (inside) 0 access-list inside_outbound_nat0_acl
[OK] sysopt connection permit-pptp

Kindly tell me how to solve this error by enabling vpdn on the same outside interface as PPPoE.


with regards

waqas