«

Where can I find websites on Cisco.com to find what modules are
supported?

I have 2621 and would like to find out what are my options.

I'd learned that WIC-1T and 2T are supported. and what else?

I thank you in advance.

-Thomas

Thomas75 <> writes:
>Where can I find websites on Cisco.com to find what modules are
>supported?

>I have 2621 and would like to find out what are my options.
>I'd learned that WIC-1T and 2T are supported. and what else?

http://www.cisco.com/go/2600/

Data Sheets


There's no global master matrix (its just gotten to be too many
interface cards. There's been one in the past, but if you find one,
it'll omit some of the newer cards, etc. Cisco documentation
now-a-days suffers from too many documents that get to be too old to
maintain, so it tends to be a pile of info).

Make sure you look at each one to see if its the 2621 or 2621XM, and not
something bigger, like the 2691 which can handle alot more than the
2621 can.

[biteater]

some older docs may tell you that NM-4T is working in 26xx.
It is _not_ working on 26xx !

and also :WIC-1ENET does not work, that's only for the 1720/1721/1760 .