![]() |
|
|
|
#1 |
|
Command:
show sip-ua min-se Example: Dial 5525 from SIP to IAD, input show sip-ua min-se at router#. It will display as follows: ************ total calls :1 *********************** *********** CALL SINGAL INFO *********************** __________________________________________________ ______________ Port | Src | Dest | SessionID | IP-ADDR | state __________________________________________________ _______________ 3 | 5T |07551234 | 22 |13.1.101.101 |FXS_PORT_CALLING_S TATE ************ PORT STATE INFO *********************** __________________________________________________ ______________ Port | State | SessionID | HoldID | WaitID | DialedDigits __________________________________________________ ______________ 3 | 3 | 22 | 0 | 0 | 5525 Show as above: Port 3(1/2) is used. The dialed number is 5525. The Src of port 3 (destination-pattern) is 5T. So the number dialed from the port 3(FXO) to PSTN is 525. Robin wang |
|
|
|
|