Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Programming > VHDL > FIFO and SRAM

Reply
Thread Tools

FIFO and SRAM

 
 
bat bat is offline
Junior Member
Join Date: Mar 2008
Posts: 2
 
      04-01-2008
Hi,

As stated in a previous post ( Need a Simple SRAM Controller => still no reply), I'm new in VHDL and FPGA programming.

I'm designing a camera processing fpga. My first task is to get data from a CMOS sensor and store it in a SRAM on an Opal Kelly XEM3050.

I found many designs and source code for SDRAM controller, but none for SRAM. My first thought is that is because doing it for SRAM is simple, but maybe is it too obvious for me so that I don't get it... But this is not the point here.

In all these designs, people used fifo's to "cache" data to and from the sdram. So my question is: should I do the same for a SRAM controller i.e. use a fifo to store data before reading or writing to the SRAM?

Sorry if my question is stupid... Once again, I'm a real newbie...
 

Last edited by bat; 04-01-2008 at 02:46 PM..
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
any body having complete code for synchronous fifo or know a link where fifo codes are available plz help chaitu VHDL 1 06-01-2007 07:03 PM
any body having complete code for a synchronous FIFO or know a link where FIFO codes are available chaitu VHDL 1 06-01-2007 03:45 AM
any body having complete code for a synchronous FIFO or know a link where FIFO codes are available chaitu VHDL 1 05-31-2007 03:31 PM
any body having complete code for a synchronous FIFO or know a link where FIFO codes are available chaitu VHDL 0 05-31-2007 02:28 PM
SRAM used as FIFO? Jo Schambach VHDL 3 02-24-2006 12:20 AM



Advertisments