2600 cisco

Hi guys
after loading a new IOS onto my 2610xm this is the message I got. the
ios before did not work properly i guess and it kept saying nvram
cannot write and that type of stuff. I figured if i instal a new ios
it would fix the problem but even afterwards i get this message


00:04:43: %SYS-5-RELOAD: Reload requested by console.environment write
to NVRAM
failed

System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
Copyright (c) 2003 by cisco Systems, Inc.

Warning: monitor nvram area is corrupt ... using default values
C2600 platform with 65536 Kbytes of main memory

if anyone has any ideas I would apprecaite it. thanks

Sam

Try to reboot your router with ignoring the config (boot into the
ROMMonitor, change config register to 0x2142, and reboot), and then reformat
NVRAM (do "write erase"). Then paste your config from the backup.
Alternatively you may try to reboot your router using old IOS image (use
TFTP IOS Recovery form the ROMMonitor).

Good luck,

Mike
CCNP, CCDP, CCSP, Cisco Voice, MCSE W2K, MCSE+I, Security+, etc.
CCIE R&S (in progress), CCIE Voice (in progress)
------
Headset Adapters for Cisco IP Phones
www.ciscoheadsetadapter.com
www.headsetadapter.com



"Sam" <> wrote in message
news:a26184af-2c2b-4815-9e1f-...
> Hi guys
> after loading a new IOS onto my 2610xm this is the message I got. the
> ios before did not work properly i guess and it kept saying nvram
> cannot write and that type of stuff. I figured if i instal a new ios
> it would fix the problem but even afterwards i get this message
>
>
> 00:04:43: %SYS-5-RELOAD: Reload requested by console.environment write
> to NVRAM
> failed
>
> System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
> Copyright (c) 2003 by cisco Systems, Inc.
>
> Warning: monitor nvram area is corrupt ... using default values
> C2600 platform with 65536 Kbytes of main memory
>
> if anyone has any ideas I would apprecaite it. thanks

headsetadapter.com

On Apr 2, 7:06*am, "headsetadapter.com" <for-s...@mail.com> wrote:
> Try to reboot your router with ignoring the config (boot into the
> ROMMonitor, change config register to 0x2142, and reboot), and then reformat
> NVRAM (do "write erase"). Then paste your config from the backup.
> Alternatively you may try to reboot your router using old IOS image (use
> TFTP IOS Recovery form the ROMMonitor).
>
> Good luck,
>
> Mike
> CCNP, CCDP, CCSP, Cisco Voice, MCSE W2K, MCSE+I, Security+, etc.
> CCIE R&S (in progress), CCIE Voice (in progress)
> ------
> Headset Adapters for Cisco IP Phoneswww.ciscoheadsetadapter.comwww.headsetadapte r.com
>
> "Sam" <SamPa...@gmail.com> wrote in message
>
> news:a26184af-2c2b-4815-9e1f-...
>
>
>
> > Hi guys
> > after loading a new IOS onto my 2610xm this is the message I got. the
> > ios before did not work properly i guess and it kept saying nvram
> > cannot write and that type of stuff. I figured if i instal a new ios
> > it would fix the problem but even afterwards i get this message
>
> > 00:04:43: %SYS-5-RELOAD: Reload requested by console.environment write
> > to NVRAM
> > failed
>
> > System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
> > Copyright (c) 2003 by cisco Systems, Inc.
>
> > Warning: monitor nvram area is corrupt ... using default values
> > C2600 platform with 65536 Kbytes of main memory
>
> > if anyone has any ideas I would apprecaite it. thanks- Hide quoted text -
>
> - Show quoted text -

Thank you for the response. I have tried that too and I still get that
NVRAM message. Do you think its a hardware issue?

Sam

Sam,

Have you tried the command "erase nvram:"?

Good luck,

Mike
CCNP, CCDP, CCSP, Cisco Voice, MCSE W2K, MCSE+I, Security+, etc.
CCIE R&S (in progress), CCIE Voice (in progress)
------
Headset Adapters for Cisco IP Phones
www.ciscoheadsetadapter.com
www.headsetadapter.com

"Sam" <> wrote in message
news:5728b19f-fbe9-4755-ba7b-...
On Apr 2, 7:06 am, "headsetadapter.com" <for-s...@mail.com> wrote:
> Try to reboot your router with ignoring the config (boot into the
> ROMMonitor, change config register to 0x2142, and reboot), and then
> reformat
> NVRAM (do "write erase"). Then paste your config from the backup.
> Alternatively you may try to reboot your router using old IOS image (use
> TFTP IOS Recovery form the ROMMonitor).
>
> Good luck,
>
> Mike
> CCNP, CCDP, CCSP, Cisco Voice, MCSE W2K, MCSE+I, Security+, etc.
> CCIE R&S (in progress), CCIE Voice (in progress)
> ------
> Headset Adapters for Cisco IP
> Phoneswww.ciscoheadsetadapter.comwww.headsetadapte r.com
>
> "Sam" <SamPa...@gmail.com> wrote in message
>
> news:a26184af-2c2b-4815-9e1f-...
>
>
>
> > Hi guys
> > after loading a new IOS onto my 2610xm this is the message I got. the
> > ios before did not work properly i guess and it kept saying nvram
> > cannot write and that type of stuff. I figured if i instal a new ios
> > it would fix the problem but even afterwards i get this message
>
> > 00:04:43: %SYS-5-RELOAD: Reload requested by console.environment write
> > to NVRAM
> > failed
>
> > System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
> > Copyright (c) 2003 by cisco Systems, Inc.
>
> > Warning: monitor nvram area is corrupt ... using default values
> > C2600 platform with 65536 Kbytes of main memory
>
> > if anyone has any ideas I would apprecaite it. thanks- Hide quoted
> > text -
>
> - Show quoted text -

Thank you for the response. I have tried that too and I still get that
NVRAM message. Do you think its a hardware issue?

headsetadapter.com