«

HI GUYS
I loaded a new IOS but i loaded the wrong one by accident and now its
exceeding memory. How do i erase it and load the right one? Now i can
only stay in ROMMON. i tried to do tftpdnld but its not working
Any ideas?
Thanks experts

Sam,

I believe 3620 have a Compact Flash slot - just copy correct IOS image into
the Flash module (may be in another router, compact flash reader or even
photocamera), and boot from that image.

Good luck,

Mike
CCNP, CCDP, CCSP, Cisco Voice, MCSE W2K, MCSE+I, Security+, etc.
CCIE R&S (in progress), CCIE Voice (in progress)
------
Headset Adapters for Cisco IP Phones
www.ciscoheadsetadapter.com
www.headsetadapter.com


"Sam" <> wrote in message
news:d57d1f1f-cc88-4ce9-96b5-...
> HI GUYS
> I loaded a new IOS but i loaded the wrong one by accident and now its
> exceeding memory. How do i erase it and load the right one? Now i can
> only stay in ROMMON. i tried to do tftpdnld but its not working
> Any ideas?
> Thanks experts

[rob_67]

Hi,


did you configure your tftp server, did you set ip address, netmask and defaultgateway for tftpdnld? -->the colleage says it is not possible with this platform, then xmodem upload...

regards,

rob

"headsetadapter.com" <for-> writes:
>I believe 3620 have a Compact Flash slot - just copy correct IOS image into
>the Flash module (may be in another router, compact flash reader or even
>photocamera), and boot from that image.


Linear flash only on that platform from what I remember.
ATA Flash wasn't supported.


>"Sam" <> wrote in message
>news:d57d1f1f-cc88-4ce9-96b5-...
>> HI GUYS
>> I loaded a new IOS but i loaded the wrong one by accident and now its
>> exceeding memory. How do i erase it and load the right one? Now i can
>> only stay in ROMMON. i tried to do tftpdnld but its not working
>> Any ideas?
>> Thanks experts

"headsetadapter.com" <for-> writes:
>You a mistaking with 2600 series. All 3600-series routers have PCMCIA slots
>to use external Flash memory. The only limitation is that they accept 4-32Mb
>cards only.

Right, linear-flash only PCMCIA cards. They have to be linear, no ATA flash.



>"Doug McIntyre" <> wrote in message
>news:47f45fb5$0$93282$ .net...
>> "headsetadapter.com" <for-> writes:
>>>I believe 3620 have a Compact Flash slot - just copy correct IOS image
>>>into
>>>the Flash module (may be in another router, compact flash reader or even
>>>photocamera), and boot from that image.
>>
>>
>> Linear flash only on that platform from what I remember.
>> ATA Flash wasn't supported.
>>
>>
>>>"Sam" <> wrote in message
>>>news:d57d1f1f-cc88-4ce9-96b5-...
>>>> HI GUYS
>>>> I loaded a new IOS but i loaded the wrong one by accident and now its
>>>> exceeding memory. How do i erase it and load the right one? Now i can
>>>> only stay in ROMMON. i tried to do tftpdnld but its not working
>>>> Any ideas?
>>>> Thanks experts
>>
>>