«

Andrew Gabriel used his keyboard to write :

>
> I've never had this echo problem on any of
> the SPA3000's I have in use.

Can you post yolur config somewhere?

>>
>> I have a copy of spa3000-3-1-20GW.bin if you need it.
>
> Still on linksys's website. Don't know if this URL will work in
> someone else's session -- if not, follow links for support and
> select product
>
> <http://www.linksys.com/servlet/Satel...me=Linksys%2FC
>
>

They must've put it back since I posted! P'rhaps they read this NG..

The link does work


> I'm running 3.1.10 on all mine (and have had many earlier versions
> on them too). Didn't actually know there was anything later until
> you mentioned it -- they seem to have stopped updating the old
> sipura website.

D'apres David Floyd <>,
dans le forum uk.telecom.voip...

> Apparently the person I call hears me fine and I can hear them OK, but I
> get an echo form my own voice and sometimes a bit of breaking up when
> both parties cross talk.

Did you adjust the line impedance settings ? Both for FXO and FXS ?

In message of Thu, 3 Apr 2008, Marc Zirnheld writes
>D'apres David Floyd <>,
>dans le forum uk.telecom.voip...
>
>> Apparently the person I call hears me fine and I can hear them OK, but I
>> get an echo form my own voice and sometimes a bit of breaking up when
>> both parties cross talk.
>
>Did you adjust the line impedance settings ? Both for FXO and FXS ?
>
>

Yes, but if you read other posts on this subject in the past as I have
now done, this is a known problem with making PSTN calls on a SPA3K

David

D'apres David Floyd <>,
dans le forum uk.telecom.voip...

> >Did you adjust the line impedance settings ? Both for FXO and FXS ?

> Yes, but if you read other posts on this subject in the past as I have
> now done, this is a known problem with making PSTN calls on a SPA3K

That's right, but having good settings helps the echo canceller
operation, thus reducing (even if not totally eliminating) the
perceivable echo.