Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > source nat in pix 506 for vpn clients

Reply
Thread Tools

source nat in pix 506 for vpn clients

 
 
Laurent
Guest
Posts: n/a
 
      03-21-2008
Hello..

I need some help in configuring source nat for vpn clients connecting to
our pix.
I'd like to source nat them to the address of the inside interface, so
they could go anywhere in other lans connected to ours.

I remove them from nat 0 list and did this below, but it seems not working :

(vpn clients are in local ip pool 172.25.0.1 to 172.25.0.15)

>pdm location 172.25.0.0 255.255.255.240 outside
>access-list NATCLIVPN permit ip 172.25.0.0 255.255.255.240 any
>nat (outside) 50 access-list NATCLIVPN
>global (inside) 50 interface



Also, I can't find any example of this kind of configuration..

thank you by advance
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
easy vpn IOS - vpn clients cannot acces another network behind nat teodor General Computer Support 0 08-20-2009 11:51 AM
PIX 501: NAT VPN Clients to Inside? Aaron Cisco 7 04-28-2008 01:13 AM
pix 501 to pix 506 easy vpn fredrikmagnil@hotmail.com Cisco 3 05-22-2006 06:42 AM
Configuring Access for L2TP and PPTP Clients on PIX 506 E NETADMIN Cisco 0 02-02-2006 11:44 AM
VPN Site-to-Site with PIX 506 and PIX 515UR (6.3.1). How ? Javier Villegas Cisco 1 01-27-2004 07:29 PM



Advertisments