D-Link DI-514 + cable modem + Win XP SP2= CRAP !!!

I have a good question for all of you.

I'm trying to hook up a D-Link D1-514 wireless router to a Terayon
TJ615 Rogers cable modem on Windows XP SP2, but whenever I hook up the
cross-connected wire from the modem to the WAN port on the router and
an ethernet cable to the computer, the IP is not reset by the router
(the settings for the Network Connection are set to automatically
detect). Even if I set up a static IP in the range of the router
(192.168.0.1 for the gateway, 192.168.0.2 for the computer), it still
doesn't allow me reach the web config panel for the router (by typing
in 192.168.0.1 in IE).

I've already gone through the support articles on the
support.dlink.com site, reset all the IE settings, disabled the
firewall, tried enabling NetBIOS over TCP/IP, resetting the router to
factory settings, cylcing power, rebooting, but nothing works !!!!
Whenever I try to ping 192.168.0.1 I get the 'Request timed out'
error. I'm thinking of rolling back Windows with a system restore to
SP1 and trying from there.

Sooo ... is there an issue with the D-Link DI-514 and Windows XP SP 2
?

superslicka

see your other post...

"superslicka" <> wrote in message
news: om...
>I have a good question for all of you.
>
> I'm trying to hook up a D-Link D1-514 wireless router to a Terayon
> TJ615 Rogers cable modem on Windows XP SP2, but whenever I hook up the
> cross-connected wire from the modem to the WAN port on the router and
> an ethernet cable to the computer, the IP is not reset by the router
> (the settings for the Network Connection are set to automatically
> detect). Even if I set up a static IP in the range of the router
> (192.168.0.1 for the gateway, 192.168.0.2 for the computer), it still
> doesn't allow me reach the web config panel for the router (by typing
> in 192.168.0.1 in IE).
>
> I've already gone through the support articles on the
> support.dlink.com site, reset all the IE settings, disabled the
> firewall, tried enabling NetBIOS over TCP/IP, resetting the router to
> factory settings, cylcing power, rebooting, but nothing works !!!!
> Whenever I try to ping 192.168.0.1 I get the 'Request timed out'
> error. I'm thinking of rolling back Windows with a system restore to
> SP1 and trying from there.
>
> Sooo ... is there an issue with the D-Link DI-514 and Windows XP SP 2
> ?

DLink Guru