Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > NZ Computing > Re: Maori milling machine

Thread Tools

Re: Maori milling machine

Posts: n/a
grumpyoldhori wrote:

> I needed an accurate way to cut slots in sheet steel for
> a slot waveguide.
> Here is the trick I used,grabbed some of those very thin
> 4'' cutting blades for my small grinder.
> Got a bolt to screw in the side of the grinder in place of
> the handle,cut head of bolt off,unplugged drillpress,put
> bolt with grinder attached into chuck.
> Works like a charm on small jobs,easy to see the work,
> without the grinder going sideways.
> Remember,do not try to feed the work into it,small jobs
> directly under the grinder only,no more than an inch free
> play,make damn sure the work is clamped down well.
> Turn the grinder off,then move work and reclamp.
> Remember,safety,safety
> grumpy

Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
ASP and 'webpage/site milling' Si ASP General 9 01-14-2005 04:08 PM
Re: Find the Maori Angkor Computer Support 22 10-09-2003 08:13 PM
Re: Find the Maori AJ Computer Support 0 10-02-2003 06:47 PM
Re: Find the Maori AJ Computer Support 1 10-02-2003 06:46 PM
Re: Find the Maori AJ Computer Support 0 10-02-2003 04:33 AM