Wireless Networking - Wireless PEAP with MSCHAPv2

03-17-2006, 10:29 PM

I currently have 2 Cisco AP 1130 and Windows Wireless GPO configured.

One AP is on the first floor and the other is on the second floor

I have configured securing wireless LANS with PEAP and MSCHAPv2 passwords

This technology works great and I followed the documentation to the tee.

Currently I do have a problem that Iâ€™m not sure how to address.

Both APs use the same SSID

When a user from the second floor walks downstairs to a conference room with
his or her laptop or on the user does not get disconnected and reconnected to
the 1st floor AP this is vice versa.

If the user is to disconnect and reconnect that works fine.

I would like some documentation or direction from anyone who uses a
Microsoft solution for their Wireless security and has configured fast
roaming or automatic detection and reconnection access in-between 2 APs on
different networks.

Thank you,
John

=?Utf-8?B?Sm9obg==?=

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Belking 54G keeps losing wireless connection.	Jello87	Hardware	0	10-13-2008 02:06 PM
Notebook + dial up modem + wireless router = wireless network ?	fujikoma_2008	Hardware	1	02-21-2008 04:02 PM
Setting up a Network -- Wired or Wireless?	shopzero.net	DVD Video	1	07-24-2006 07:18 PM
Re: adding wireless to a wired network	AG	A+ Certification	3	01-14-2005 08:52 AM
Re: adding wireless to a wired network	Remo	A+ Certification	0	01-07-2005 06:31 PM

03-17-2006, 10:29 PM	#1
	Wireless PEAP with MSCHAPv2 I currently have 2 Cisco AP 1130 and Windows Wireless GPO configured. One AP is on the first floor and the other is on the second floor I have configured securing wireless LANS with PEAP and MSCHAPv2 passwords This technology works great and I followed the documentation to the tee. Currently I do have a problem that Iâ€™m not sure how to address. Both APs use the same SSID When a user from the second floor walks downstairs to a conference room with his or her laptop or on the user does not get disconnected and reconnected to the 1st floor AP this is vice versa. If the user is to disconnect and reconnect that works fine. I would like some documentation or direction from anyone who uses a Microsoft solution for their Wireless security and has configured fast roaming or automatic detection and reconnection access in-between 2 APs on different networks. Thank you, John =?Utf-8?B?Sm9obg==?=