Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Configuring Cisco 2821 with S/T modules in Malaysia PJ using ISDN BRIfrom Telekom Malaysia

Reply
Thread Tools

Configuring Cisco 2821 with S/T modules in Malaysia PJ using ISDN BRIfrom Telekom Malaysia

 
 
roylmk@gmail.com
Guest
Posts: n/a
 
      12-10-2007
Dear Experts,

we are using Cisco 2821 installed with S/T BRI modules and DSP. We
have subscribed to the ISDN BRI services from Telekom Malaysia. We
would like to use the ISDN BRI to setup voice gateway to use Cisco IP
telephony (Cisco IP phone 7941, cisco IP phone 7961 and Cisco 7936).

Any experts kind enough to share what is the Telekom Malaysia's
Exchange configuration to match with what we need to set in the
router?

Thanks
Roy
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
pc with isdn modem not connecte isdn 1841 router with isdn module sync Cisco 0 06-05-2007 10:10 AM
Configuration for setup: ISDN - Cisco 2821 - SIP Phone Bjoern Morgenthaler Cisco 0 10-12-2006 02:48 PM
Configuration for setup: ISDN - Cisco 2821 - SIP Phone Bjoern Morgenthaler VOIP 0 10-12-2006 02:48 PM
X-Lite Telephone - Cisco 2821 Router - Emutel Pro ISDN Line Simulator 0TKN3T VOIP 0 07-28-2005 04:34 PM



Advertisments