Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Can't call international number via ISDN BRI

Reply
Thread Tools

Can't call international number via ISDN BRI

 
 
jshubo@yahoo.com
Guest
Posts: n/a
 
      02-09-2006
I have my 2 port ISDN BRI VIC connect to telco and local/national call
are all working, but international number and emergency number 000 is
not working. You will hear "You number is incorrect etc". But I do be
able to call that number via analog line or mobile.

I have adjusted the TON to subscriber/international etc and also NPI to
ISDN/Unkown etc. Still doesn't work, I have also adjusted the bearer
capacity, still no luck. As we can see the Q931 debug shown below, it
indicated that the disconnect cause is "Cause i = 0x8281 -
Unallocated/unassigned number". Are there any other possible cause for
this issue other than it's telco's fault? (0011 is the IDD access
code, I have also tried to remove that as well, still not working).

Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x89
Progress Ind i = 0x8183 - Origination address is non-ISDN
Display i = 'Shubo'
Calling Party Number i = 0x4180, '88536108'
Plan:ISDN, Type:Subscriber(local)
Called Party Number i = 0x91, '00116445765777'
Plan:ISDN, Type:International
002688: *Feb 9 15:14:24.342 PCTime: ISDN BR0/1/0 Q931: RX <- STATUS pd
= 8 cal lref
= 0xA7
Cause i = 0x82E328 - Information element not implemented
Call State i = 0x01
002689: *Feb 9 15:14:24.486 PCTime: ISDN BR0/1/0 Q931: RX <- CALL_PROC
pd = 8
callref = 0xA7
Channel ID i = 0x89
002690: *Feb 9 15:14:24.522 PCTime: ISDN BR0/1/0 Q931: RX <-
DISCONNECT pd = 8
callref = 0xA7
Cause i = 0x8281 - Unallocated/unassigned number
Progress Ind i = 0x8288 - In-band info or appropriate now
available

 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
HiPath 3570 and Cisco 1760 via ISDN BRI Georgi Sinapov Cisco 2 05-17-2008 01:45 PM
pc with isdn modem not connecte isdn 1841 router with isdn module sync Cisco 0 06-05-2007 10:10 AM
ISDN BRI analog call Dragec Cisco 2 10-01-2004 07:44 AM
ISDN (BRI) Dial-in w/cisco 2611, routing Rainer Cisco 4 07-21-2003 08:10 AM
Help with ISDN PRI & BRI Wayne Cisco 3 07-12-2003 01:56 PM



Advertisments