«

Hi Paul,

Thanks for the response, but I don't have platform builder only evc.

Regards
Laery
----------------------
Yes, you can do it via the Windows Zero Config API. When you call
WZCSetInterface(), you'd set the infrastructure mode field of the structure
one way or the other.

Paul T.

"Laery" <> wrote in message
news: om...
> Hi,
>
> I'm currently working on an application where a ppc2003 device prints
> to a mobile network printer using point-to-point wifi connection.
> (both fixed IP).
>
> For communication with the PC a FTP server is started on the handheld
> which is connected to a wifi-router which is connected to the pc using
> a cable.
>
> The problem:
> The printer is point-to-point (you cannot take the accesspoint with
> you on the street).
> The communication with the PC is using an access-point. (There can be
> several devices, more than 50, at an office location)
>
> Currently the switch in connection mode has to be done manually using
> the supplies driver GUI. Is there away to do it using an API from
> windows?
>
> Each handheld and printer has a unique IP but the same SSID and WEP.
> (same as the accesspoint)
>
> Or can something be done on the PC so that it connects to the
> terminals one by one.
>
> Regards
> Laery

Then you probably don't have enough information to make a serious attempt at
this. You could download the evaluation version of PB and go from there...

Paul T.

"Laery" <> wrote in message
news: om...
> Hi Paul,
>
> Thanks for the response, but I don't have platform builder only evc.
>
> Regards
> Laery
> ----------------------
> Yes, you can do it via the Windows Zero Config API. When you call
> WZCSetInterface(), you'd set the infrastructure mode field of the
> structure
> one way or the other.
>
> Paul T.
>
> "Laery" <> wrote in message
> news: om...
>> Hi,
>>
>> I'm currently working on an application where a ppc2003 device prints
>> to a mobile network printer using point-to-point wifi connection.
>> (both fixed IP).
>>
>> For communication with the PC a FTP server is started on the handheld
>> which is connected to a wifi-router which is connected to the pc using
>> a cable.
>>
>> The problem:
>> The printer is point-to-point (you cannot take the accesspoint with
>> you on the street).
>> The communication with the PC is using an access-point. (There can be
>> several devices, more than 50, at an office location)
>>
>> Currently the switch in connection mode has to be done manually using
>> the supplies driver GUI. Is there away to do it using an API from
>> windows?
>>
>> Each handheld and printer has a unique IP but the same SSID and WEP.
>> (same as the accesspoint)
>>
>> Or can something be done on the PC so that it connects to the
>> terminals one by one.
>>
>> Regards
>> Laery